Feature Descriptions for 7043-150 IBM RS/6000 Model 150

From AIX Museum
Revision as of 21:17, 4 January 2022 by AIX Museum (talk | contribs) (Created page with "=(#0001) After-market (MES) Order Indicator= (No Longer Available as of March 21, 2008) This feature may be used in orders for features ordered by MES. This feature prevents...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

(#0001) After-market (MES) Order Indicator

(No Longer Available as of March 21, 2008)

This feature may be used in orders for features ordered by MES. This feature prevents configuration checking. It does not have to be repeated for subsequent MES orders for the same machine.

  • Attributes provided: None
  • Attributes required: None
  • For 7043-150: (#0001)
    • Minimum required: 0
    • Maximum allowed: _1__ (Initial order maximum: _1__)
    • OS level required: None
    • Initial Order/MES/Both/Supported: MES

(#0986) CCS Customer Service Specify (US)

This feature code specifies that the system will receive special request services from the Center for Customized Solutions (CCS).

FC 0986 is available only on the initial plant order.

  • Attributes provided: None
  • Attributes required: None
  • For 7043-150: (#0986)
    • Minimum required: 0
    • Maximum allowed: No max(Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial

(#1736) Expedited Delivery Service Indicator:

(No Longer Available as of June 25, 2004)

This feature number specifies that a system will be shipped to the customer with expedited 2 day delivery.

  • Attributes provided: None
  • Attributes required: None
  • For 7043-150: (#1736)
    • Minimum required: 0
    • Maximum allowed: 1 (Initial order maximum: 1)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Initial
    • CSU: Does not apply
    • Return parts MES: Does not apply

(#2111) PCI SCSI Adapter To 2-Port, 8-Bit SE External Device Cable

(No Longer Available as of December 3, 2001)

  • Attributes provided: Attachment of external 2-port, 8-bit devices to the PCI SCSI-2 Fast/Wide adapter
  • Attributes required: 1 external SCSI-2 Fast/Wide Port
  • For 7043-150: (#2111)
    • Minimum required: 0
    • Maximum allowed: No max(Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both

(#2112) PCI SCSI Adapter To 2-Port, 8-Bit Differential Ext Device C able

(No Longer Available as of December 3, 2001)

  • Attributes provided: Attachment of external 2-port, 8-bit differential devices to the PCI SCSI-2 differential adapter
  • Attributes required: 1 external SCSI-2 Fast/Wide Port
  • For 7043-150: (#2112)
    • Minimum required: 0
    • Maximum allowed: No max(Initial order maximum: No max)
    • OS level required: None
    • Initial Order/MES/Both/Supported: Both

(#2113) PCI SCSI Adapter To Single Port 8-Bit SE External Device Cable

(No Longer Available as of December 3, 2001) 

   Attributes provided: Attachment of external single-port, 8-bit SE devices to the PCI SCSI-2 Fast/Wide adapter
   Attributes required: 1 external SCSI-2 Fast/Wide Port
   For 7043-150: (#2113)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2114) PCI SCSI Adapter 16-Bit Differential External Y Cable

(No Longer Available as of June 23, 2006) 

   Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 differential adapter
   Attributes required: 1 external SCSI-2 Fast/Wide Port
   For 7043-150: (#2114)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2115) PCI SCSI Adapter To 2-Port, 16-Bit SE External Device Cable

(No Longer Available as of April 26, 2002) 

   Attributes provided: Attachment of external 2-port 16-bit SE devices to the PCI SCSI-2 Fast/Wide adapter
   Attributes required: 1 external SCSI-2 Fast/Wide Port
   For 7043-150: (#2115)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2116) PCI SCSI Adapter To 2-Port, 16-Bit Differential Ext Device Cable

(No Longer Available as of April 26, 2002) 

   Attributes provided: Attachment of external 2-port 16-bit differential devices to the PCI SCSI-2 differential adapter
   Attributes required: 1 external SCSI-2 Fast/Wide Port
   For 7043-150: (#2116)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2117) PCI SCSI Adapter 16-bit SE External Y Cable

(No Longer Available as of December 3, 2001) 

   Attributes provided: Attachment of multiple hosts to the PCI SCSI-2 Fast/Wide adapter
   Attributes required: 1 External SCSI-2 Port
   For 7043-150: (#2117)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2118) SCSI Converter Cable, VHDCI to P, Mini-68 pin to 68 pin, 0.3M

(No Longer Available as of June 23, 2006)

16-bit SCSI cable used to convert from a Mini-68 pin VHDCI connector to a 68 pin P style connector. Cable has male Mini-68 pin VHDCI connector on one end and a female 68 pin P style connector on the other. Length = 0.3 meters. 

   Attributes provided: Attachment of supported external sub-system to integrated SCSI port or SCSI adapter with VHDCI Mini-68 pin connector.
   Attributes required: None
   For 7043-150: (#2118)
       Minimum required: 0
       Maximum allowed: _No max (Initial order maximum: 0)
       OS level required: None
       Initial Order/MES/Both/Supported: MES

Note: #2118 provides the equivalent hardware to the 7131-105 (#9164 or #2888). (#2424) 0.6M 16-bit SCSI-2 System to System Cable

(No Longer Available as of December 10, 2004)

This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. 

   Attributes provided: 0.6 meter SCSI cable with 68-pin connectors at each end
   Attributes required: 68-pin SCSI Interface
   For 7043-150: (#2424)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2425) 2.5M 16-bit SCSI-2 System to System Cable

(No Longer Available as of June 23, 2006)

This cable provides a 16-bit connection between any two differential or single ended SCSI devices having 68-pin connectors. It can be used to attach an external SCSI device to a SCSI adapter card in an RS/6000 system. 

   Attributes provided: 2.5 meter SCSI cable with 68-pin connectors at each end
   Attributes required: 68-pin SCSI Interface
   For 7043-150: (#2425)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2445) Internal Ultra SCSI Cable Assembly

(No Longer Available as of December 27, 2002)

The Internal Ultra SCSI Cable Assembly #2445 is an internal 16-bit Ultra SCSI cable that provides a signal path from the single-ended Ultra SCSI adapter to internal Ultra SCSI single-ended disk drives. 

   Attributes provided: Cable from PCI Single-ended Ultra SCSI adapter to Single-ended Ultra SCSI devices. 3-Drop, 16-Bit.
   Attributes required: PCI Single-ended Ultra SCSI Adapter (#6206)
   For 7043-150 (#2445)
       Minimum required: 0
       Maximum required: 1 (Initial order maximum: 1)
       OS level required: None
       Initial order/MES/Both/Supported: Both

(#2494) PCI 3-Channel Ultra2 SCSI RAID Adapter

(No Longer Available as of December 1, 2000)

The RS/6000 PCI 3-Channel Ultra2 SCSI RAID Adapter (#2494) is a non- bootable high-performance Ultra2 SCSI RAID Adapter providing RAID 0, 1, or 5 capability and can address up to forty-five 16-bit SCSI-2 physical disk drives on three independent SCSI buses.

To increase the data writing performance, a 32 MB fast-write cache is provided as a resident part of this adapter. The 32 MB fast-write cache is a resident feature of the IBM PCI 3-Channel Ultra2 SCSI RAID Adapter that utilizes non-volatile RAM. During the unlikely event of an PCI 3-Channel Ultra2 SCSI RAID Adapter failure, a replacement PCI 3-Channel Ultra2 SCSI RAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter helping to insure data integrity. The 32 MB fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The PCI 3-Channel Ultra2 SCSI RAID Adapter has one internal and two external independent Ultra2 SCSI buses. The internal port can be used to provide an internal RAID solution on supporting RS/6000 systems. Systems with internal 6-pack disks can attach one PCI 3-Channel Ultra2 SCSI RAID adapter per internal 6-pack.The two external ports provide connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate. The two external ports can also connect to the IBM 7131-105 external Fast/Wide SCSI disk enclosure via an optional VHDCI to P Converter Cable (#2118). Note: Even though the PCI 3-Channel Ultra2 SCSI RAID Adapter has ports that run at Ultra2 SCSI speeds (up to 80 MB per second), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system backplane. Also, the externally attached 7131-105 will only run at a maximum of Fast/Wide SCSI speeds (up to 20 MB per second).

In order for full support and to take full advantage of the Ultra2 (up to 80 MB per second) speed of this adapter, the proper AIX level also needs to be considered. AIX 4.2.1 with appropriate APAR updates and 4.3.3 or later supports the full range of SCSI bus data rates (including Ultra2 SCSI up to 80 MB per second). AIX 4.3.2 only supports data rates up to 40 MB per second. Check the AIX level your system has or is able to support. Appropriate AIX APAR needed are as follows: 

   AIX 4.2.1 with APAR IX86638, IX86654, IX87183, IY01945, & IY02373
   AIX 4.3.2 with APAR IX86395, & IX86396
   AIX 4.3.3 or later

Upgrading an existing PCI 3-Channel Ultra SCSI RAID Adapter (#2494) to the later version PCI 3-Channel Ultra2 SCSI RAID Adapter is also available after September 24, 1999. To upgrade to the Ultra2 version (up to 80 MB per second capability), a new level of microcode needs to be downloaded. To obtain this later level of microcode (3.12.00 or higher), go to the below web address and follow the microcode download procedure. AIX levels with appropriate APAR updates described above also apply in conjunction with the microcode upgrade. 

   http://www.rs6000.ibm.com/support/micro/download.html 

   Attributes provided: Attachment of internal and external SCSI devices
   Attributes required: One PCI bus slot
   For 7043-150: (#2494)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1 with APARs (see description above); 4.3.2 with APARs (see description above); AIX 4.3.3 or later
       Initial Order/MES/Both/Supported: Both

Note: An Update CD-ROM (9903 or later) containing these updates can be obtained by calling 1-800-879-2755 in USA and ordering feature code 0837 for AIX 4.2.1 or feature code 0838 for AIX 4.3.2. These Update APARS may also be obtained by contacting your normal Service Channel Support Line or FixDist. (#2498) PCI 4-Channel Ultra3 SCSI RAID Adapter

(No Longer Available as of December 10, 2004)

The RS/6000 PCI 4-Channel Ultra3 SCSI RAID Adapter(#2498) is a non- bootable high performance Ultra3 SCSI RAID Adapter providing RAID 0,1,1E, 5, 5E capability and can address up to sixty 16-bit SCSI physical disk drives on four independent SCSI buses.

To increase the data writing performance, a 128 MByte fast-write cache is provided as a resident part of this adapter. The 128 MByte fast-write cache is a resident feature of the PCI 4-Channel Ultra3 SCSI RAID Adapter that utilizes non-volatile RAM. During the unlikely event of an PCI 4-Channel Ultra3 SCSI

RAID Adapter failure, a replacement PCI 4-Channel Ultra3 SCSI RAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter insuring data integrity. The 128 MByte fast-write cache can provide an significant improvement in data throughput and response time during certain sequence write operations compared to SCSI

RAID adapters without the fast-write cache. The response time and data transfer improvement will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters.

The PCI 4-Channel Ultra3 SCSI RAID Adapter has four independent Ultra3 SCSI buses. There are two internal ports and four external ports. The two internal ports are shared with two of the external ports. Two of the four busses can drive either an internal port or an external port. The other two busses only drive external ports. The internal ports can be used to provide an internal RAID solution on supporting RS/6000 systems. Systems with one or two internal 6-pack disks can attach to a PCI 4-Channel Ultra3 SCSI RAID Adapter. The four external ports provide connectivity to an IBM 2104-DU3 Expandable Storage Plus Drawer or 2104-TU3 Expandable Storage Plus Tower at up to 160 MB/s SCSI bus data rate. The four external ports also provide connectivity to an IBM 2104-DL1 Expandable Storage Plus Drawer or 2104-TL1 Expandable Storage Plus Tower at up to 80 MB/s SCSI bus data rate.

Limitations: 

   The four external ports do not support the connection to the IBM 7131-105 external Fast/Wide SCSI disk enclosure.
   Even though the PCI 4-Channel Ultra3 SCSI RAID Adapter has ports that run at Ultra3 SCSI speeds (up to 160 MBytes/s) and Ultra2 SCSI speeds (up to 80MBytes/s), the internally attached disk drives will run at a maximum SCSI bus data rate specified by that supporting system backplane.

In order for full support and to take full advantage of the Ultra3 (up to 160 MBytes/s) speed of this adapter, the proper AIX level also needs to be considered. AIX 4.3.3 with appropriate APAR updates or later AIX versions support the full range of SCSI bus data rates (including Ultra3 SCSI up to 160 MByte/s). Check the AIX level your system has or is able to support. 

   Attributes provided: Attachment of internal and external SCSI devices
   Attributes required: One PCI bus slot
   For 7043-150: (#2498)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with 4330-05 Recommended Maintenance Package.
       Initial Order/MES/Both/Supported: Both

(#2623) 4.7 GB SCSI-2 DVD-RAM Drive (Black Bezel)

(No Longer Available as of September 24, 2004)

The SCSI-2 DVD-RAM drive is a multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This device also provides read/write compatibility with conventional 2.6GB DVD-RAM discs. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics: 

   Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diameter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
   Interface: SCSI-2 supporting synchronous and asynchronous data transfer
   Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
   High-speed synchronous burst rate of 10MB/second
   Loading tray accommodates both 8cm discs (in horizontal orientation only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
   Operates in either vertical or horizontal position
   Reads multi-session discs
   Reads CD-recordable discs
   Reads CD-RW discs
   Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
   Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio
   Contains headphone output and line output for audio

Limitations: 

   DVD video is not supported.
   Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
   Attributes required: 1 half high media bay and one SCSI address
   For 7043-150: (#2623)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
       Initial Order/MES/Both/Supported: Both

(#2624) 32X (Max) SCSI-2 CD-ROM Drive

(No Longer Available as of July 29, 2005)

The 32X (Max) SCSI-2 Internal CD-ROM Drive is a tray loading CD-ROM drive providing up to 4800KB/sec maximum media data transfer rate. It is a 5.25 inch half-high form factor, single ended, 8 bit, multi-session capable, CD-ROM drive which provides state of the art performance and supports existing 600MB CD-ROM discs.

Characteristics: 

   Media Data Transfer Rate: 4800 KB/sec (Max)
   Interface: SCSI-2 8 bit Single Ended (SE)
   Avg. Random Access Time: 90ms (typical)
   Buffer Memory: 512KB
   Media capacity: Greater than 600MB
   Multisession capable (Reads CDR & CDRW media)
   5.25-inch half-high form factor
   Operates in either vertical or horizontal positions
   Interface supports standard and extended XA formats
   Loading tray supports 12cm and 8cm disks 

   Attributes provided: 600MB 32X (max)(up to 4800KB/sec) CDROM
   Attributes required: 1 half high media bay and 1 SCSI-2 internal SE 8-bit address
   For 7043-150: (#2624)
       Minimum required: 1
       Maximum allowed: _2_ (Initial order maximum: _2_)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2627) 4.7 GB SCSI-2 DVD-RAM Drive (White Bezel)

(No Longer Available as of December 27, 2002)

The SCSI-2 DVD-RAM drive is a multifunction storage device capable of reading and writing 4.7GB DVD-RAM discs and reading CD-ROM discs. This device also provides read/write compatibility with conventional 2.6GB DVD-RAM discs. System boot and install functions are supported with CD-ROM and DVD-RAM media.

Characteristics: 

   Media Data Transfer Rate: 3600KB/sec CD-ROM (24X) max @ outer diam eter, 1350KB/sec write (1X DVD) and 2705KB/sec read (2X DVD)
   Interface: SCSI-2 supporting synchronous and asynchronous data transfer
   Average Random Access Time: 100ms CD-ROM, 155ms DVD-RAM
   High-speed synchronous burst rate of 10MB/second
   Loading tray accommodates both 8cm discs (in horizontal orientation only), 12cm discs (CD-ROM) and 4.7GB DVD cartridges
   Operates in either vertical or horizontal position
   Reads multi-session discs
   Reads CD-recordable discs
   Reads CD-RW discs
   Reads and writes 2.6GB, 4.7GB and 9.4GB (double sided) DVD-RAM media
   Supports all major CD-ROM formats including Mode 1, Mode 2, XA, CDDA and audio
   Contains headphone output and line output for audio

Limitations: 

   DVD video is not supported.
   Attributes provided: 4.7GB 2X DVD (2705 KB/Sec) DVD-RAM
   Attributes required: 1 half high media bay and one SCSI address
   For 7043-150: (#2627)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
       Initial Order/MES/Both/Supported: Both

(#2639) Ultimedia Video Capture Adapter/S

(No Longer Available as of December 1, 2000)

The Ultimedia Video Capture Adapter is a PCI-based video monitoring and capture adapter for supported RS/6000 systems. It works with a variety of PCI-based graphics. The adapter supports three industry-standard video formats: NTSC, PAL, and SECAM. This adapter provides the ability to capture video and still images for entry-level video conferencing, security monitoring, security identification, and other images applications. 

   Attributes provided: Video capture
   Attributes required: One PCI slot
   For 7043-150: (#2639)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum:1)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2708) Eicon ISDN DIVA PRO 2.0 PCI S/T Adapter

(No Longer Available as of October 17, 2001)

Connects PCI RS/6000 systems to worldwide ISDN networks. The adapter comes from Eicon Technology, the world leader in ISDN technology, as a fully supported IBM feature. ISDN provides basic rate 2B + D with 64 Kbps on each B channel. TCP/IP applications are supported.

Note: AIX drivers are shipped on diskette with the hardware feature. Systems ordered with AIX preinstalled will have the device drivers installed on the hard disk drive.

Country approvals for ISDN network attachment: Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom, United States

Provides S/T interface, requires connection to NT-1 (Network Terminator-1) from the phone line provider.

Limitation: This adapter is not supported by AIX 5.1 (32 bit or 64 bit kernel). 

   Attributes provided: One ISDN BRI connection
   Attributes required: One PCI slot
   For 7043-150: (#2708)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum:1)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2709) ARTIC960Hx 4-Port T1 RJ48 Cable

(No Longer Available as of June 25, 2004)

4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or ARTIC960RxD Quad Digital Trunk adapter. 

   Attributes provided: 4-Port T1 RJ48 cable
   Attributes required: #6310 Adapter
   For 7043-150: (#2709)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2710) ARTIC960Hx 4-Port E1 RJ48 Cable

(No Longer Available as of June 25, 2004)

4-Port T1 RJ48 cable for the ARTIC960Hx 4-Port T1/E1 PCI Adapter or ARTIC960RxD Quad Digital Trunk adapter. 

   Attributes provided: 4-Port E1 RJ48 cable
   Attributes required: #6310 Adapter
   For 7043-150: (#2710)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2741) SysKonnect SK-NET FDDI-LP SAS PCI

(No Longer Available as of May 18, 2003) 

   Fiber optical FDDI Single Attach Station

This adapter provides single attachment to a FDDI concentrator (or point-to-point) using fiber optic cabling (not supplied with the adapter).

It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.

Features: 

   Occupy single PCI bus slot
   Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
   SMT 7.3 compliance
   AMD SUPERNET3 single chip FDDI design
   SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
   Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
   128KB static RAM on board
   Support under AIX SMIT and diagnostic routines
   Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.

Connection requirements: 

   Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low cost fiber) connector

Limitation: 

   A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
   NIM is supported on this system using FDDI on AIX 4.2.1 and later.

Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at http://www.austin.ibm.com/support/micro/

Note: AIX Device Driver diskette is shipped with the adapter.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes provided: One Single Attach Station Fiber FDDI port
   Attributes required: One PCI Slot
   For 7043-150: (#2741)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2742) SysKonnect SK-NET FDDI-LP DAS PCI

(No Longer Available as of May 18, 2003) 

   Fiber optical FDDI Dual Attach Station

This adapter provides either dual attachment to the main ring path or dual homing to one or two FDDI concentrators using fiber optic cabling (not supplied with the adapter).

It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.

Features: 

   Occupy single PCI bus slot
   Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
   SMT 7.3 compliance
   AMD SUPERNET3 single chip FDDI design
   SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
   Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
   128KB static RAM on board
   Support under AIX SMIT and diagnostic routines
   Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.

Connection requirements: 

   Connect to fiber FDDI concentrator ports using fiber optic cable with an FDDI SC (low cost fiber) connector

Limitation: 

   A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
   NIM is supported on this system using FDDI on AIX 4.2.1 and later.

Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at http://www.austin.ibm.com/support/micro/

Note: AIX Device Driver diskette is shipped with the adapter.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes provided: One Dual Attach Station Fiber FDDI port
   Attributes required: One PCI Slot
   For 7043-150: (#2742)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2743) SysKonnect SK-NET FDDI-UP SAS PCI

(No Longer Available as of July 31, 2001) 

   Copper FDDI Single Attach Station

This adapter provides single attachment to a FDDI concentrator (or point-to-point) using Category-5 unshielded twisted pair (UTP) cabling (not supplied with the adapter).

It also offers high speed, low latency, and low CPU and bus utilization and occupies a single PCI bus slot.

Features: 

   Occupy single PCI bus slot
   Compatible with the FDDI-ANSI X3T12 specification and FDDI Standard Series
   SMT 7.3 compliance
   AMD SUPERNET3 single chip FDDI design
   SysKonnect designed custom ASIC with for buffer management with minimal CPU and bus load
   Four independent 128-byte FIFOs for buffering between PCI bus and buffer memory
   128KB static RAM on board
   Support under AIX SMIT and diagnostic routines
   Supports Remote IPL and NIM with the appropriate system firmware. See Limitations section.

Connection requirements: 

   Connect to Category-5 unshielded twisted pair FDDI concentrator ports using shielded RJ45 connector

Limitation: 

   A configuration using more than one SysKonnect FDDI adapter (feature 2741, 2742, or 2743) where any one of them is feature 2743 (SysKonnect SK-NET FDDI-UP SAS PCI), constitutes a Class A system.
   NIM is supported on this system using FDDI on AIX 4.2.1 and later.

Note: FDDI Remote IPL, systems shipped after April 24, 1998, will have the appropriate firmware factory installed. Systems shipped prior to April 24, 1998, require an upgrade of system firmware to support the Remote IPL function for FDDI adapters. If you find you have problems with FDDI Remote IPL, make sure you obtain the latest system firmware. Instructions on how to obtain this firmware can be obtained by calling IBM Service and asking for Retain Tip H162841 or by reviewing and downloading from the RS/6000 Support microcode web page located at http://www.austin.ibm.com/support/micro/

Note: AIX Device Driver diskette is shipped with the adapter.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes provided: One Single Attach Station CDDI (copper) port
   Attributes required: One PCI Slot
   For 7043-150: (#2743)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2823) POWER GXT2000P Graphics Accelerator

(No Longer Available as of June 30, 2002)

The POWER GXT2000P Graphics Accelerator is a short PCI adapter card that attaches to one slot. It supports display resolutions up to 1920 x 1200 maximum resolution up to 76 Hz, including monitors that comply with the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million simultaneous colors. For the OpenGL and graPHIGS APIs, the GXT2000P offers support for 8-bit and 24-bit double-buffered color.

Characteristics of the IBM POWER GXT2000P Graphics Accelerator are: 

   1920 x 1200 maximum resolution up to 76 Hz
       Maximum refresh rate for 1600x1200 and smaller displays is 85 Hz 
   8-bit and 24-bit double-buffered color
   24-bit Z-buffer
   8-bit overlay buffer
   4-bit window ID buffer
   4-bit stencil buffer
   Four 256-entry hardware color tables
   Separate gamma correction table
   Face culling support
   OpenGL polygon offset support
   OpenGL polygon mode support
   16 MB texture memory
   Trilinear texture mapping
   Video support
       Point sampling and bilinear scaling
       Color space conversion 

   Attributes provided: Graphics capability
   Attributes required: Any Slot; one of the following monitors: P70, P200, P201, P72, P92, P202 , 6091-19I, POWERDP17, POWERDP20, 9516 or T85A.
       For 7043-150: (#2823)
           Minimum required: 0
           Maximum allowed: 4 (Initial order maximum: 4)
           OS level required: AIX 4.2.1 or AIX 4.3.2 or later with the appropriate AIX 4.2.1 or 4.3.2 Update CD that is included with the feature.
           Initial Order/MES/Both/Supported: Both 
       For MES orders of the GXT3000P and GXT2000P on AIX Version 4.2.1:
           If your operating system was installed with AIX Version 4.2.1 prior to October 1998, you must apply the following 'AIX Version 4.2.1 refresh for October 1998' (this includes boot media and the update CD).
               AIX 4.2.1 LCD4-0238-02 
           If you have AIX 4.2.1, LCD4-0238-00 or LCD4-0238-01 please update to
               LCD4-0238-02 to run this program. 
       Updating Current Licensees:
           Current Licensees of AIX 4.2 who have not paid a media process charge are encouraged to call IBM direct at 800-426-2255.
           Current Licensees of AIX 4.2 who have already paid a media process charge are encouraged to order MES updates by calling 800-879-2755. IBM Software Delivery Solutions (SDS) requires that all AIX/6000(R) licensed programs installed on any RS/6000 hardware be installed for the customer's appropriate hardware and software serial numbers on AAS. If these conditions are met, SDS will enter an order for an MES to ship the release and will process the installation of the MES. The hours of operation are Monday through Friday, 7:00 a.m. to 4.00 p.m. mountain time.

(#2825) POWER GXT3000P Graphics Accelerator

(No Longer Available as of April 26, 2002)

The POWER GXT3000P Graphics Accelerator is a single PCI adapter card that attaches to one slot but covers the slot adjacent to it. It supports display resolutions up to 1280 x 1024, including monitors that comply with the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million simultaneous colors.

For the OpenGL and graPHIGS APIs, the GXT3000P offers support for 8-bit and 24-bit double-buffered color.

The GXT3000P provides hardware acceleration for the new OpenGL 1.2 version of the API. Featured hardware enhancements over the POWER GXT800P include: 

   OpenGL and graPHIGS lighting mode
   3D texture mapping
   Stereo in a window
   Video scaling

Characteristics of the IBM POWER GXT3000P Graphics Accelerator are: 

   1280 x 1024 maximum resolution up to 85 Hz
   8-bit and 24-bit double-buffered color
   24-bit Z-buffer
   8-bit overlay buffer
   8-bit window ID buffer
   8-bit stencil buffer
   8-bit double-buffered alpha
   16 MB texture memory
   Eight 256-entry hardware color tables
   Separate gamma correction table
   Hardware accelerated lighting
   Increased subpixel addressing over previously supported adapters
   Face culling support
   OpenGL polygon offset support
   OpenGL polygon mode support
   OpenGL specular lighting support in hardware
   Trilinear Texture Mapping
   3D texture mapping
   Video support
       Point sampling and bilinear scaling
       Color space conversion 
   Stereo support (1)
       12-bit RGB on a per window basis
       1024 x 768 at 120 Hz
       Preserved aspect ratio

Note: (1) Stereo viewing requires additional equipment, such as emitter, cable, and glasses. 

   Attributes provided: Graphics capability
   Attributes required: Slot 2; one of the following monitors: P70, P200, P201, P72, P92, or P202
   For 7043-150: (#2825)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum:1)
       OS level required: AIX 4.2.1 or AIX 4.3.2 or later with the appropriate AIX 4.2.1 or 4.3.2 Update CD that is included with the feature.
       Initial Order/MES/Both/Supported: Both 

   For MES orders of the GXT3000P and GXT2000P on AIX Version 4.2.1:
       If your operating system was installed with AIX Version 4.2.1 prior to October 1998, you must apply the following 'AIX Version 4.2.1 refresh for October 1998' (this includes boot media and the update CD).
           AIX 4.2.1 LCD4-0238-02 
       If you have AIX 4.2.1 , LCD4-0238-00 or LCD4-0238-01 please update to
           LCD4-0238-02 to run this program. 

   Updating Current Licensees:
       Current Licensees of AIX 4.2 who have not paid a media process charge are encouraged to call IBM direct at 800-426-2255.
       Current Licensees of AIX 4.2 who have already paid a media process charge are encouraged to order MES updates by calling 800-879-2755. IBM Software Delivery Solutions (SDS) requires that all AIX/6000(R) licensed programs installed on any RS/6000 hardware be installed for the customer's appropriate hardware and software serial numbers on AAS. If these conditions are met, SDS will enter an order for an MES to ship the release and will process the installation of the MES. The hours of operation are Monday through Friday, 7:00 a.m. to 4.00 p.m. mountain time.

(#2830) POWER GXT130P Graphics Accelerator

(No Longer Available as of May 18, 2003)

The POWER GXT130P is a versatile, low-priced graphics accelerator for RS/6000 PCI-bus systems. It is a half-length PCI card with a standard 15-pin DIN output connector and can support multisync monitors with at least a 64 KHz horizontal scan capability.

Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version 4.2.1 or 4.3.

AIX Version 4.2.1 or 4.3.2 is required with the appropriate AIX Version 4.2.1 or 4.3.2 and the additional device drivers required that are included with the feature. 

   For MES orders of the GXT130P Graphics Accelerator:
       If your operating system was installed with AIX Version 4.2.1 before October 1998, you must apply the following AIX Version 4.2.1 refresh for October 1998 (this includes boot media and the additional device drivers required that are included with the feature.):
           AIX Version 4.2.1 LCD4-0238-02 
       If you have AIX Version 4.2.1 (LCD4-0238-00 or LCD4-0238-01), update to LCD4-0238-02 to run this program. 

   Attributes provided: Graphics adapter
   Attributes required: 1 PCI slot
   For 7043-150: (#2830)
       Minimum required: 0
       Maximum allowed: _4_ (Initial order maximum: _4_)
       OS level required: AIX Version 4.2.1, or 4.3
       Initial Order/MES/Both/Supported: Both

(#2838) POWER GXT120P Graphics Adapter - PCI

(No Longer Available as of September 8, 1999)

The POWER GXT120P provides video acceleration features such as scaling and color space conversion. The GXT120P can support multisync monitors with at least a 64KHz horizontal scan capability or DDC-2B-compliant multisync monitors with at least a 38KHz horizontal scan capability.

Ultimedia Services 2.2.0 and Xlib APIs are supported on AIX Version 4.2.1 or 4.3. 

   Attributes provided: Graphics adapter
   Attributes required: 1 PCI slot
   For 7043-150: (#2838)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum:4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2841) POWER GXT300P Graphics Accelerator

(No Longer Available as of April 26, 2002)

The Power GXT300P Graphics Accelerator is for mid-range 2D design and visualization solutions. The GXT300P Graphics Accelerator is a short PCI adapter card requiring one PCI slot. It supports display resolutions up to 1600 x 1200 (maximum) at up to 75 Hz. For 1280x1024 and smaller display resolutions, maximum refresh rate is 85Hz.

The GXT300P complies with the ISO 9241 Part 3 and Part 8 standard, and allows up to 16.7 million simultaneous colors. For XWindows, the GXT300P offers support for 8-bit and 24-bit double buffered color.

Characteristics: 

   1600 x 1200 maximum resolution up to 75 Hz
       Maximum refresh rate for 1280x1024 and smaller displays is 85 Hz 
   8-bit and 24-bit double-buffered color
   8-bit overlay buffer
   4-bit window ID buffer
   Four 256-entry hardware color tables
   Separate gamma correction table
   Video support 

   Attributes provided: 2D graphics capability
   Attributes required: One PCI slot
   For 7043-150: (#2841)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX Version 4.3.3, or later
       Initial Order/MES/Both/Supported: Both

(#2842) - POWER GXT4500P Graphics Accelerator

IBM POWER GXT4500P -- Entry, 3D 64-bit PCI graphics accelerator 

   Attachment via a single 64-bit or 32-bit PCI bus slot
   Native support for OpenGL and graPHIGS 3D APIs
   Advanced 3D texture mapping
   Digital monitor support

The GXT4500P Graphics Accelerator is a 64-bit entry 3D PCI Graphics adapter. The graphics subsystems provide excellent functionality and performance for demanding graphics applications in: 

   Mechanical Computer Aided Design (MCAD) and Engineering (MCAE) for automotive and aerospace
   Petroleum exploration and production
   Scientific Visualization
   Other technical design and visualization

This adapter has the following base features: 

   128MB Unified Frame Buffer
       24 Bit Double Buffered up to 2048 x 1536
       24-Bit Double Buffered Stereo up to 1280 x 1024
       24-Bit Z-Buffer
       4/8 Bit Overlay
       8 Bit Double Buffered Alpha
       8 bit Stencil
       8 windows ID bits
       4 Clipping Planes 
   Scissor Registers
   5 HW Rectangular Clippers
   Texture Mapping
       up to 110MB Texture Memory (1280 x 1024)
       Dual Texture
       3D texture 
   4 Hardware Color Maps

API support - X11, graPHIGS, OpenGL 1.2

Monitor Support 

   Resolutions Supported: 8/16/24 bit (up to 2048 x 1536 @ 60Hz)
   DDC2B support
   ISO 9241-3 and ISO 13406-2 Compliant

Software Requirements: AIX Version 4.3.3 or 5.1, or later

The GXT4500P is packaged on a standard single-slot PCI card. The PCI interface is 64-bit, up to 66 MHz and 5.0 v or 3.3v. There are no options. 

   Attributes provided: 3D Graphics
   Attributes required: 1 long PCI 32 or 64-bit slot, 5.0v or 3.3v
   For 7043-150: (#2842)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX 4.3.3 or AIX 5.1, or later
       Initial Order/MES/Both/Supported: Both

(#2845) POWER GXT550P Graphics Adapter/C - PCI

(No Longer Available as of September 8, 1999)

The POWER GXT550P Graphics Adapter is a single PCI adapter card. It supports display resolutions of 1280 x 1024 and 1024 x 768 including monitors that comply with the ISO 9241 Part 3 standard, and allows up to 16.7 million simultaneous colors. For the OpenGL, GL 3.2, graPHIGS and PEX APIs, the GXT550P offers support for 8-bit and 24-bit double-buffered color. For the OpenGL and GL 3.2, the GXT550P also supports 12-bit double-buffered color.

The GXT550P provides hardware acceleration for advanced 3D graphics functions including hidden-line and surface removal, antialiasing, Gouraud shading, depth cueing, stenciling and transparency. Stereo viewing is also supported on the GXT550P. 

   Characteristics of the IBM POWER GXT550P Graphics Adapter are:
       1280x1024 resolution
       ISO support 77 Hz Video Refresh
       8/12/24-bit Double Buffer
       24-bit Z Buffer
       8-bit Overlay Buffer
       8-bit Window ID Buffer
       8-bit Utility/Stencil Buffer
       8-bit Alpha Double Buffer 

   Attributes provided: Graphics capability
   Attributes required: 1 PCI slot (long)
   For 7043-150: (#2845)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2849) POWER GXT135P Graphics Accelerator with Digital Support

(No Longer Available as of November 27, 2009)

The POWER GXT135P is a versatile, low-priced 2D graphics accelerator for RS/6000 workstations and pSeries servers. It can be configured to operate in either 8-bit or 24-bit color modes. This adapter supports both analog and digital monitors. Its predecessor, Feature Number 2848, supported only analog monitors. 

   Hardware Description
       128-bit graphics processor
       8-bit CLUT or 24-bit true color
       16 MB SDRAM
       32-bit PCI interface
       Universal PCI (5.0v or 3.3v)
       1 hardware color map 

   Features Supported
       Up to approximately 16.7 million colors
       Rectangular clipping
       2 analog monitor outputs at up to 1280 x 1024 resolution
       1 analog monitor output at up to 2048 x 1536 resolution
       1 digital monitor output at up to 1600 x 1200 resolution
       60 to 85 Hz refresh rates (ISO 9241, Part 3) 

   APIs Supported
       X-Windows and Motif
       UMS 2.3.0 (no hardware scaling) 

   Software Requirements: AIX Versions 5.1 or 5.2 (analog or digital support),or later, or AIX 4.3 (analog support only) 

   Attributes provided: 2D Graphics
   Attributes required: 1 PCI slot
   For 7043-150: (#2849)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 5.1 or AIX 5.2, or later
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#2851) POWER GXT250P Graphics Adapter - PCI

(No Longer Available as of December 13, 1999)

The IBM POWER GXT250P Graphics Adapter is an 8-bit, single buffer adapter (8-bit double buffer for 1024x768) that attaches to the standard PCI bus interface. It is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD.

Characteristics of the POWER GXT250P are: 

   64-bit or 32-bit PCI bus interface
   3MB of VRAM
   Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit block transfer
   Pattern fill support
   Rectangular and non-rectangular clipping
   Up to 256 colors from a palette of 16.7 million
   Hardware window support (4 Window ID Bits)
   Dithering
   Three hardware color maps
   Monitor resolution support
       AIX 4.1.5: 1024 x 768, 1280 x 1024 
   60 to 85 Hz Monitor refresh rates
   Capable of driving monitors that meet ISO 9241 Part 3 Specification 

   Attributes provided: Graphics Capability
   Attributes required: PCI Slot (short)
   For 7043-150: (#2851)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2852) POWER GXT255P Graphics Adapter - PCI

(No Longer Available as of September 8, 1999)

The IBM POWER GXT255P Graphics Adapter is an 8, 16, or 24-bit, single- buffer adapter (8-bit double-buffer up to 1280x1024) that attaches to the standard PCI bus interface. It is designed for 2D applications including: desktop publishing, X-window applications, 2D mechanical drafting, CASE, chemical and biological applications, and electrical CAD.

Characteristics of the POWER GXT255P are: 

   64-bit or 32-bit PCI bus interface
   8MB of VRAM
   Hardware acceleration for points, lines, triangles, rectangles, quadrilaterals, bit block transfer
   Pattern fill support
   Rectangular and Non-rectangular clipping
   Up to 16.7 million colors from a palette of 16.7 million
   Hardware window support (4 Window ID Bits)
   Dithering
   Three hardware color maps
   Monitor resolution support
       AIX 4.1.5: 1024 x 768, 1280 x 1024 
   60 to 85Hz Monitor refresh rates
   Capable of driving monitors that meet ISO 9241 Part 3 Specification 

   Attributes provided: Graphics Capability
   Attributes required: PCI Slot (short)
   For 7043-150: (#2852)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2861) ARTIC960Hx 4-Port EIA-232 Cable

(No Longer Available as of June 23, 2006) 

   Attributes provided: 4-port EIA-232 cable for (#2947)
   Attributes required: One #2947 adapter
   For 7043-150: (#2861)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2862) ARTIC960Hx 4-Port RS-449 Cable

(No Longer Available as of July 31, 2001) 

   Attributes provided: 4-port RS-449 cable for (#2947)
   Attributes required: One #2947 adapter
   For 7043-150: (#2862)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2863) ARTIC960Hx 4-Port X.21 Cable

(No Longer Available as of June 23, 2006) 

   Attributes provided: 4-port X.21 cable for (#2947)
   Attributes required: One #2947 adapter
   For 7043-150: (#2863)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2864) ARTIC960Hx 4-Port V.35 (DTE) Cable

(No Longer Available as of June 23, 2006) 

   Attributes provided: 4-port X.35 (DTE) cable for (#2947)
   Attributes required: One #2947 adapter
   For 7043-150: (#2864)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2865) ARTIC960Hx 4-Port EIA-530 Cable

(No Longer Available as of December 3, 2001)

4-port EIA-5 cable for (#2947). 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#2865)
       Minimum required: 0
       Maximum allowed: 1 per adapter(Initial order maximum: 1 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2871) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 3M 4-Port Cable

(No Longer Available as of June 25, 2004) 

   Attributes provided: Connection of 1 to 4 T1 Trunk lines.
   Attributes required: One (#6310) adapter
   For 7043-150: (#2871)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2872) IBM ARTIC960RxD Quad DTA, T1, 100 Ohm, 15M Extension Cable

(No Longer Available as of June 25, 2004) 

   Attributes provided: Connection of 1 to 4 T1 Trunk lines.
   Attributes required: One (#2871) cable
   For 7043-150: (#2872)
       Minimum required: 0
       Maximum allowed: 4 per #2871 (Initial order maximum: 4 per #2871)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2873) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 3M 4-Port Cable

(No Longer Available as of June 25, 2004) 

   Attributes provided: Connection of 1 to 4 E1 Trunk lines.
   Attributes required: One (#6310) adapter
   For 7043-150: (#2873)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2874) IBM ARTIC960RxD Quad DTA, E1, 120 Ohm Balanced, 7.5M Extension Cable

(No Longer Available as of June 25, 2004) 

   Attributes provided: Connection of 1 to 4 E1 Trunk lines.
   Attributes required: One (#6310) adapter and ##2873) cable
   For 7043-150: (#2874)
       Minimum required: 0
       Maximum allowed: 4 per adapter (Initial order maximum: 4 per adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2875) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Grounded, 1.8M 4-Port Cable

(No Longer Available as of December 27, 2002) 

   Attributes provided: Connection of 1 to 4 E1 Trunk lines.
   Attributes required: One (#6310) adapter
   For 7043-150: (#2875)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2876) IBM ARTIC960RxD Quad DTA, E1, 75 Ohm Unbalanced-Ungrounded, 1.8M 4-Port Cable

(No Longer Available as of December 27, 2002) 

   Attributes provided: Connection of 1 to 4 E1 Trunk lines.
   Attributes required: One (#6310) adapter
   For 7043-150: (#2876)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2877) IBM ARTIC960RxD Quad DTA, H.100, 4-Drop Cable

(No Longer Available as of November 26, 2010)

This cable provides the capability to interconnect adapters that provide H.100 bus connectors. This 4-position cable should be used when 4 or less adapters with H.100 connectors will be interconnected. When more than 4 and less than or equal to 8 adapters will be connected, the H.100 Bus 8-Drop Cable (#4353) should be used. 

   Attributes provided: H.100 bus connection between adapters
   Attributes required: Two to four H.100 adapters
   For 7043-150: (#2877)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required:
       Initial Order/MES/Both/Supported: Both

(#2900) 4.5GB Ultra-SCSI 16-bit Disk Drive

(No Longer Available as of December 13, 1999)

The 4.5GB Ultra-SCSI 16-bit Disk Drive is a high-performance disk drive that provides 4.5GB capacity that supports the Ultra SCSI interface speed of 40MB/s.

Note: Requires Ultra-SCSI adapter #6206 to operate at 40MB/s. 

   Form Factor ........... 1-inch(25mm) high by 4.0-inch (102mm) wide
   Cable included ................... No
   External Interface ............... Ultra SCSI (16-bit, Single-Ended)
   Attachment Industry Spec ......... SCSI-3 Fast 20/ANSI Spec X3T10/1071D
   SCSI bus interface Speed ......... 40MB/s (max)
   Average Seek Time .................7.9 ms
   Average Latency .................. 4.17ms
   Rotational Speed ................. 7200 RPM
   Maximum Media Data Transfer Rate . 13.7 MB/sec

Note: Average seek times and maximum data transfer rate are equal to or better than noted.

Limitation These disks are supported by AIX Version 4.1.3 or later, and AIX Version 4.2 or later. 

   Machines ordered with AIX Version 4.1.3 or 4.1.4 will require the addition of APAR #IX61149 for disks and diagnostics.

   Machines ordered with AIX 4.2.0 will require the addition of APAR #IX60676.

These APARs can be obtained through FixDist or from the IBM Support Center. For information on FixDist, refer to the following URL on the worldwide web: 

   http://aix.boulder.ibm.com/aix.us/fixes 

   Attributes provided: 4.5GB of disk storage
   Attributes required: 1 half-high disk bay and 1 SCSI internal, single-ended, 16-bit address.
   For 7043-150: (#2900)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2908) 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive

(No Longer Available as of May 21, 2001)

The 9.1GB Ultra-SCSI 16-bit 1-inch (25mm) High Disk Drive offers high- performance that provides 9.1GB of storage capacity and supports the industry Ultra-SCSI interface speed of 40MBps.

Note: Requires Ultra-SCSI adapter (#6206) to operate at 40 MBps.

Characteristics: 

   Form Factor: 1-inch (25mm) high by 4.0-inch (102mm) wide
   Cable included: No
   External Interface: Ultra-SCSI (16-bit, Single Ended)
   Attachment Industry Spec: SCSI-3 Fast 20/ANSISpec X3T10/1071D
   Average Seek Time: 7.2 ms (based on four(4) READS to one(1) WRITE)
   Average Latency: 4.17 ms
   Rotational Speed: 7200 RPM
   Maximum Media Data Transfer Rate: 22.4MBps 

   Machines ordered with AIX Version 4.1.3, 4.1.4, and 4.1.5 require the additional APAR IX61149, IX62529, and IX62576 for disks and diagnostics.
   Machines ordered with AIX Version 4.2.0 require the addition of APAR IX60676, IX62155, and IX62156.

Note: These APARs can be obtained through FixDist or from the IBM Support Center. For information on Fix Disk, refer to the following URL on the World Wide Web: http://aix.boulder.ibm.com/aix.us/fixes 

   Attributes provided: 9.1GB of disk storage.
   Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
   For 7043-150: (#2908)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2909) 18.2 GB Ultra SCSI 16-bit 1-inch (25-mm) High Disk Drive

(No Longer Available as of May 21, 2001)

The 18.2 GB Ultra SCSI 16-bit 1-inch (25 mm) High Disk Drive provides 18.2 GB of storage capacity and supports the industry's Ultra SCSI interface speed of 40 MBps.

Note: Requires Ultra SCSI adapter (#6206) to operate at 40 MBps.

Characteristics: 

   Form Factor: 1-inch (25-mm) high by 4.0-inch (102-mm) wide
   Cable included: No
   External Interface: Ultra SCSI (16-bit, Single Ended)
   Attachment Industry Spec: SCSI-3 Fast 20/ANSISpec X3T10/1071D
   Average Seek Time: 7.2 ms (based on four(4) READS to one(1) WRITE)
   Average Latency: 4.17 ms
   Rotational Speed: 7200 rpm
   Maximum Media Data Transfer Rate: 32 MBps 

   Attributes provided: 18.2GB of disk storage.
   Attributes required: One half-high disk bay and one SCSI internal single-ended 16-bit address.
   For 7043-150: (#2909)
       Minimum required: 0
       Maximum allowed: _3__ (Initial order maximum: _3_)
       OS level required: One of the following supported operating systems:
           AIX Version 4.2.0 with APAR #IX60676, IX162155, and IX162156 (later versions of AIX 4.2 do not need the APARs)
           AIX Version 4.3, or later 

       Note: Above APARs for AIX Version 4.2.0 are included:
           In factory orders with pre-loaded AIX
           As part of the AIX 4.2 service CD-ROM. 
       Initial Order/MES/Both/Supported: Both

(#2920) IBM PCI Token-Ring Adapter

(No Longer Available as of December 13, 1999)

The IBM PCI Token-Ring Adapter is a high performance, 32 bit bus master, adapter designed to operate on selected RS/6000 models that incorporate the Peripheral Component Interconnect (PCI) bus interface. Featuring an enhanced system interface for higher throughput and lower system utilization, coupled with RJ-45 and DB9 connectors, this adapter is better equipped to handle the LAN environment requirements of today's servers and high-end workstations running I/O intensive applications on the network. Additional features and support include: 

   Operation at either 16 Mbps or 4 Mbps over unshielded twisted pair (UTP) or shielded twisted pair (STP) via the RJ-45 and the 9-pin D-shell connectors.
   Automatic ring speed detection. To simplify installation and reduce network down time, the adapter automatically determines the ring speed and mode of an operating network and configures itself accord
   External status light-emitting diodes (LEDs), providing visual indication of adapter and ring status without disrupting operation.
   Full duplex LAN operation for simultaneously transmitting and receiving data.
   The system may be booted from the IBM PCI Token-Ring Adapter. 

   Attributes provided:
   Attributes required:
   For 7043-150: (#2920)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2934) Asynchronous Terminal/Printer Cable EIA-232

The Asynchronous Printer/Terminal Cable is used for attaching printers, plotters, and terminals that support the EIA-232 standard to any asynchronous adapter. This cable is the equivalent of the combination of FC 2936 (modem cable) and FC 2937 (printer/terminal interposer) and replaces this method of printer/terminal attachment.

This cable is 3m (9.8 feet) long, uses DB25 connectors and is supported on all RS/6000 systems using any asynchronous ports. It is used in conjunction with: 

   FC 2931 (8-port Async Adapter EIA232, ISA bus)
   FC 8133 (RJ45-DB25 converter cable for 16-port RANs 8130, 8134, 8136) 

   Attributes provided: EIA232 device attachment capability
   Attributes required: Any RS/6000 Asynchronous port
   For 7043-150: (#2934)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2936) Asynchronous Cable EIA-232/V.24

Used to attach a modem to the standard I/O ports with the 10-pin to 25-pin converter cable (shipped with the system), 8-port Cable Assembly, 16-Port Cable Assembly, 16-Port Asynchronous Concentrator (with RJ-45 to DB-25 Converter Cable feature FC 6402) or the 16-Port EIA-232 Remote Async Node (with RJ45 to DB25 Converter Cable feature FC 8133). The cable is 3 meters (9.8 feet) in length. 

   Attributes provided: Modem attachment to async or serial port
   Attributes required: Async or serial port
   For 7043-150: (#2936)
       Minimum required: 0
       Maximum allowed: No max(Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2943) 8-Port Asynchronous Adapter EIA-232/RS-422, PCI bus

(No Longer Available as of November 27, 2009)

For connection of up to 8 asynchronous EIA-232 or RS-422 devices. All eight ports are software programmable to support either EIA-232E or RS-422A protocols, at up to 230K baud. 

   Attributes provided: 8 Async ports
   Attributes required: One PCI slot
   For 7043-150: (#2943)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2944) 128-Port Asynchronous Controller, PCI bus

(No Longer Available as of March 31, 2006)

The 128-Port Async Adapter subsystem provides attachment for a high concentration of asynchronous lines (up to 128) from a single PCI bus slot. This gives the system the ability to serve a large number of user of EIA-232 or RS-422 devices such as terminals, printers, and modems.

Two 2.4 Mbps synchronous channels link the adapter to a maximum of eight 16-Port Remote Async Nodes (RANs), up to four RANs can be linked to each synchronous channel.

The new RANs being announced provide 16 EIA-232 (#8137) or 16 RS-422 (#8138) ports yielding a total of 128-ports in a maximum configuration.

Existing RANs feature numbers 8130, 8134, or 8136 can also be used with this adapter. If these RANs are connected the synchronous channel the data rate drops down to 1.2 Mbps. For the best results keep the previous and new RANs on separate synchronous channels. 

   Attributes provided: Up to 128 Async Ports
   Attributes required: One PCI slot, One to eight (#8137) or (#8138)
   For 7043-150: (#2944)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later

(#2945) Asynchronous Terminal Cable - EIA-422A

(No Longer Available as of July 31, 2001)

Provides a 20 meter (66 feet) interface cable for attaching an EIA-422A Terminal to the 8-Port and 16-Port Cable Assembly. 

   Attributes provided: EIA-422A attachment capability
   Attributes required: 8-Port Asynchronous Adapter EIA232/422A (#2932)
   For 7043-150: (#2945)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2947) IBM ARTIC960Hx 4-Port Multiprotocol PCI Adapter

(No Longer Available as of October 13, 2006)

The IBM ARTIC960Hx 4-Port Selectable PCI Adapter (#2947) is a one- slot, standard length, 32-bit PCI card. The adapter provides 4-Ports of: EIA-232, EIA530, RS-449, X.21, or V.35. Each port will support speeds of up 2.0M bps. Software support is provided by AIX Versions 4.2.1 or 4.3.2 or later that provide SDLC and Bisync support; AIX Versions 4.1.5, 4.2.1, 4.3.1 or later that provide AIXLink X.25 LPP Version 1.1.5 support.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: 

   http://www.ibm.com/servers/aix/os/adapters/51.html 

   Attributes provided: One to four WAN connections at up to 2.0Mbps
   Attributes required: One full length 32-bit PCI slot, AIX Version 4.2.1 or 4.3.2 or later (for SDLC or Bisync support); AIX Version 4.1.5, 4.2.1, 4.3.1 or later (for AIXLink X.25 LPP Version 1.1.5 support).
   For 7043-150: (#2947)
       Minimum required: 0
       Maximum allowed: _3_ (Initial order maximum: _3_)
       OS level required: See 'Description' above
       Initial Order/MES/Both/Supported: Both

(#2951) 2-Port Cable, V.24 / EIA-232

(No Longer Available as of December 30, 2005) 

   For 7043-150: (#2951)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2952) 2-Port Cable, V.35

(No Longer Available as of December 30, 2005) 

   For 7043-150: (#2952)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2953) 2-Port Cable, V.36 / EIA-449

(No Longer Available as of December 30, 2005) 

   For 7043-150: (#2953)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2954) 2-Port Cable, X.21

(No Longer Available as of December 30, 2005) 

   For 7043-150: (#2954)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#2962) 2-Port Multiprotocol PCI Adapter

(No Longer Available as of December 30, 2005)

This adapter provides high-speed connections between stand-alone system units on a WAN. To access WAN lines, the 2-Port Multiprotocol PCI Adapter connects via external communications equipment including Channel Service Units (CSU), Data Service Units (DSU), or through synchronous modems.

This adapter together with IBM AIXlink/X.25 provides a two-port connection to X.25 packet switched networks. IBM AIXlink/X.25 is a separately orderable LPP (5696-926).

2-Port Multiprotocol PCI Adapter with an appropriate cable is compatible with: 

   X.21 DCE - Using 2-Port Cable, X.21 (#2954)
       CCITT X.21 Signalling
       CCITT V.11 Electrical
       CCITT X.27 Electrical
       EIA-422-A Electrical
       ISO 4903 Connector for DCE side of an X.21 VHSI Modem Cable 

   V.24 DCE - Using 2-Port Cable, V.24/EIA-232 (#2951)
       CCITT V.24 Signalling
       CCITT V.28 Electrical
       CCITT X.21bis Electrical and Signalling
       EIA-232-C Electrical and Signalling
       ISO 2110 Connector for DCE side of an V.24 VHSI Modem Cable 

   V.35 DCE - Using 2-Port Cable, V.35 (#2952)
       CCITT V.35 Some signals for signalling
       CCITT V.28 Some signals for electrical and signalling
       ISO 2593 Connector for DCE side of an V.35 VHSI Modem Cable 

   V.36 DCE - Using 2-Port Cable, V.36/EIA-449 (#2953)
       CCITT V.10 Electrical
       CCITT V.11 Electrical 

   Attributes provided: Two high speed WAN connections
   Attributes required: One PCI slot
   For 7043-150: (#2962)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2963) TURBOWAYS 155 PCI UTP ATM Adapter

(No Longer Available as of December 3, 2001)

Provides dedicated, 155 Mbps full-duplex connection to ATM networks over either permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also supports communication with devices located on an ATM network or bridged to a token-ring, Ethernet, or other LAN. 

   Attributes provided: One ATM 155 UTP connector
   Attributes required: One PCI slot
   For 7043-150: (#2963)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2968) IBM 10/100 Mbps Ethernet PCI Adapter

(No Longer Available as of December 3, 2001)

Provides a 10 Mbps (10BaseT) or 100 Mbps (100BaseTx) full-duplex Ethernet LAN connection. The adapter supports 32-bit bus master PCI connection to the host system for enhanced data throughput and lower bus utilization. The adapter supports Category-5 Unshielded Twisted Pair. 

   Attributes provided: One 10/100 Mbps Ethernet connector
   Attributes required: One PCI slot
   For 7043-150: (#2968)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2988) TURBOWAYS 155 PCI MMF ATM Adapter

(No Longer Available as of December 3, 2001)

Also provides direct access to ATM networks. The TURBOWAYS 155 PCI MMF ATM Adapter provides dedicated 155Mbps full-duplex connection using PVCs or SVCs and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

Note: Systems ordered with AIX preinstalled will have the device drivers installed on the hard disk drive.

TURBOWAYS 155 PCI MMF ATM Adapter is compatible with: 

   IBM 8285 ATM Workgroup Switch
   IBM 8260 ATM Subsystem
   IBM 8282 ATM Concentrator
   IBM 8281 ATM LAN Bridge 

   Attributes provided: One ATM 155Mbps connection
   Attributes required: One PCI slot
   For 7043-150: (#2988)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#2998) TURBOWAYS 25 ATM PCI Adapter

(No Longer Available as of October 17, 2001)

For direct access to ATM networks, the &atm25 provides dedicated 25Mbps full-duplex connection using PVCs or SVCs and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

Note: AIX drivers are shipped on diskette with the hardware feature. Systems ordered with AIX preinstalled will have the device drivers installed on the hard disk drive.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes provided: One ATM 25Mbps connection
   Attributes required: One PCI slot
   For 7043-150: (#2998)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#3027) 9.1GB 10,000 RPM Ultra-SCSI Disk Drive

(No Longer Available as of April 9, 2002)

The 9.1GB 10,000 RPM Ultra SCSI Disk Drive provides 9.1GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.

Characteristics: 

   Form Factor: 3.5-inch, 1-inch (25 mm) high
   Cable included: No
   External Interface: Ultra SCSI (16-bit, Single Ended)
   Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
   Average Seek Time: 6.02 milliseconds
   Average Latency: 2.99 milliseconds
   Rotational Speed: 10,000 RPM
   Maximum Data Transfer Rate: 30.5 MBps

Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI Adapter in order for the drive to run at 40 MBps. 

   Attributes provided: 9.1 GB storage capacity
   Attributes required: One disk drive bay.
   For 7043-150: (#3027)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX 4.2.1, or AIX 4.3.3 or later
       Initial Order/MES/Both/Supported: Both

(#3102) 18.2 GB 10,000 RPM Ultra SCSI Disk Drive

(No Longer Available as of August 8, 2003)

The 18.2GB 10,000 RPM Ultra SCSI Disk Drive provides 18.2GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.

Characteristics: 

   Form Factor: 3.5-inch, 1-inch (25 mm) high
   Cable included: No
   External Interface: Ultra SCSI (16-bit, Single Ended)
   Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
   Average Seek Time: 6.02 milliseconds
   Average Latency: 2.99 milliseconds
   Rotational Speed: 10,000 RPM
   Maximum Data Transfer Rate: 44.3 MBps

Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI Adapter in order for the drive to run at 40 MBps. 

   Attributes provided: 18.2 GB storage capacity
   Attributes required: One disk drive bay.
   For 7043-150: (#3102)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX 4.2.1, AIX 4.3.3 or later
       Initial Order/MES/Both/Supported: Both

(#3119) - 36.4GB 10,000 RPM Ultra SCSI Disk Drive

(No Longer Available as of December 10, 2004)

The 36.4GB 10,000 RPM Ultra SCSI Disk Drive provides 36.4GB of storage capacity and supports the industry standard Ultra SCSI interface speed of 40 MBps.

Characteristics: 

   Form Factor: 3.5-inch, 1-inch (25 mm) high
   Cable included: No
   External Interface: Ultra SCSI (16-bit, Single Ended)
   Attachment Industry Spec: SCSI-3 fast 20, ANSI Spec X3T10/1071D
   Average Seek Time: 6.02 ms (based on four(4) READS to one(1) WRITE)
   Average Latency: 2.99 ms
   Rotational Speed: 10,000 RPM
   Maximum Data Transfer Rate: 44.3 MBps

Note: Ultra SCSI disk drives require attachment to a supported Ultra SCSI adapter in order for the drive to run at 40 MBps. 

   Attributes provided: 36.4GB of disk storage
   Attributes required: One disk drive bay.
   For 7043-150: (#3119)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or later
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3124) Serial to Serial Port Cable for Drawer/Drawer

This cable is available to provide a null-modem connection between the serial ports of two CPU drawers that are mounted within the same rack. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#3124)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3125) Serial to Serial Port Cable for Rack/Rack

This cable is available to provide a null-modem connection between the serial ports of two CPU drawers that are mounted in separate racks. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#3125)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3620) IBM P72 Color Monitor

(No Longer Available as of December 13, 1999)

The P72 monitor has the following general characteristics: 

   17-inch Trinitron (R) CRT with a viewable image size of 16.0 inches (407 mm), incorporating a 0.25 mm aperture grille for bright, high- definition images.

   A maximum horizontal frequency of 85 KHz provides reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced with a maximum addressability of 1280 x 1024 pels. 

   Attributes provided: Color monitor
   Attributes required: Graphics adapter
   For 7043-150: (#3620)
       Minimum required: 0
       Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3621) IBM P92 Color Monitor

(No Longer Available as of June 18, 1999)

The P92 monitor has the following general characteristics: 

   19-inch Trinitron (R) CRT with a viewable image size of 17.9 inches (456 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.

   A maximum horizontal frequency of 94 KHz provides reduced flicker operation at an optimum 1280 x 1024 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels. 

   Attributes provided: Color monitor
   Attributes required: Graphics adapter
   For 7043-150: (#3621)
       Minimum required: 0
       Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3622) IBM P202 Color Monitor

(No Longer Available as of December 13, 1999)

The P202 monitor has the following general characteristics: 

   21-inch Trinitron (R) CRT with a viewable image size of 19.8 inches (503 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.

   A maximum horizontal frequency of 107 KHz provides reduced flicker operation at an optimum 1600 x 1200 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels. 

   Attributes provided: Color monitor
   Attributes required: Graphics adapter
   For 7043-150: (#3622)
       Minimum required: 0
       Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3623) IBM P72 Color Monitor, Business Black, Captured Cable

(No Longer Available as of December 13, 1999)

The P72 monitor has the following general characteristics: 

   17-inch Trinitron (R) CRT with a viewable image size of 16.0 inches (407 mm), incorporating a 0.25 mm aperture grille for bright, high- definition images.

   A maximum horizontal frequency of 85 KHz provides reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced with a maximum addressability of 1280 x 1024 pels. 

   Attributes provided: Color monitor
   Attributes required: Graphics adapter
   For 7043-150: (#3623)
       Minimum required: 0
       Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3625) IBM P92 Color Monitor, Business Black, and Cable

(No Longer Available)

The P92 monitor has the following general characteristics: 

   19-inch Trinitron (R) CRT with a viewable image size of 17.9 inches (456 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.

   A maximum horizontal frequency of 94 KHz provides reduced flicker operation at an optimum 1280 x 1024 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels. 

   Attributes provided: Color monitor
   Attributes required: Graphics adapter
   For 7043-150: (#3625)
       Minimum required: 0
       Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3626) IBM P202 Color Monitor, Business Black, and Cable

(No Longer Available as of October 25, 1999)

The P202 monitor has the following general characteristics: 

   21-inch Trinitron (R) CRT with a viewable image size of 19.8 inches (503 mm), incorporating a 0.25 - 0.27 mm aperture grille for bright, high-definition images.

   A maximum horizontal frequency of 107 KHz provides reduced flicker operation at an optimum 1600 x 1200 pels at up to 85 Hz non-interlaced with a maximum addressability of 1600 x 1200 pels.
       Attributes provided: Color monitor
       Attributes required: Graphics adapter
       For 7043-150: (#3626)
           Minimum required: 0
           Maximum allowed: 4 per graphics adapter (Initial order maximum: 4 per graphics adapter)
           OS level required: None
           Initial Order/MES/Both/Supported: Both

(#3627) IBM P76/P77 Color Monitor, Business Black, Captured Cable

(No Longer Available as of July 25, 2003)

The P76/P77 monitor has the following general characteristics: 

   Business Black color
   17-inch Flat Trinitron (R) CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
   Designed to provide reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced, with a maximum addressability of 1600 x 1200 pels at 75 Hz.

   The P76/P77 monitor has the following general characteristics:
       Attributes provided: Color Monitor
       Attributes required: Graphics Adapter
       For 7043-150: (#3627)
           Minimum required: 0
           Maximum allowed: _4_ (Initial order maximum: _4_)
           OS level required: None
           Initial Order/MES/Both/Supported: Both

(#3628) IBM P260/P275 Color Monitor, Business Black, and Cable

(No Longer Available as of February 27, 2004)

The P260/P275 monitor has the following general characteristics: 

   Business Black color
   21-inch Flat Trinitron (R) CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
   Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.

   Note: The P260 and P275 monitors are functionally equivalent.
       Attributes provided: Color Monitor
       Attributes required: Graphics Adapter
       For 7043-150: (#3628)
           Minimum required: 0
           Maximum allowed: _4_ (Initial order maximum: _4_)
           OS level required: None
           Initial Order/MES/Both/Supported: Both

(#3629) IBM P76/P77 Color Monitor, Pearl White, Captured Cable

(No Longer Available as of December 31, 2002)

The P76/P77 monitor has the following general characters: 

   Pearl White Color
   17-inch Flat Trinitron(R) CRT with a viewable image size of 406 mm (16.0 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for bright, high-definition images.
   Designed to provide reduced flicker operation at an optimum 1024 x 768 pels at up to 85 Hz non-interlaced, with a maximum addressability of 1600 x 1200 pels at 70 Hz.

   Note: The P76 and P77 monitors are functionally equivalent.
       Attributes provided: Color Monitor
       Attributes required: Graphics Adapter
       For 7043-150: (#3629)
           Minimum required: 0
           Maximum allowed: _4_ (Initial order maximum: _4_)
           OS level required: None
           Initial Order/MES/Both/Supported: Both

(#3630) IBM P260/P275 Color Monitor, Pearl White, and Cable

(No Longer Available as of December 31, 2002)

The P260/P275 monitor has the following general characters: 

   Pearl White Color
   21-inch Flat Trinitron(R) CRT with a viewable image size of 503 mm (19.8 inches) measured diagonally, incorporating a 0.24 mm stripe pitch for high-definition images.
   Designed to provide reduced flicker operation at an optimum addressability of 1600 x 1200 pels at up to 85 Hz non-interlaced.

   Note: The P260 and P275 monitors are functionally equivalent.
       Attributes provided: Color Monitor
       Attributes required: Graphics Adapter
       For 7043-150: (#3630)
           Minimum required: 0
           Maximum allowed: _4_ (Initial order maximum: _4_)
           OS level required: None
           Initial Order/MES/Both/Supported: Both

(#3635) - T210 Flat-Panel Monitor

(No Longer Available as of February 18, 2003)

The T210 flat-panel monitor has the following general characteristics: 

   Business Black color
   21-inch TFT LCD digital screen with a viewable image size of 528 mm (20.8 inches) measured diagonally, incorporating a 0.207 mm pixel pitch/type for bright, high-definition images.
   Designed to provide flicker free operation at a maximum resolution of 2048 x 1536 pels at 60Hz.
   Tilt/swivel stand 

   Attributes provided: Color Flat-panel Monitor
   Attributes required: Graphics Adapter
   For 7043-150: (#3635)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3636) L200P Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The L200p flat-panel monitor has the following general characteristics: 

   Business Black color
   20.1-inch TFT LCD digital screen with a viewable image size of 510 mm (20.1 inches) measured diagonally, incorporating a 0.255 mm pixel pitch/type for bright, high-definition images.
   Designed to provide flicker free operation at a maximum resolution of 1600 x 1200 pels at 75Hz in analog mode and 1600 x 1200 pels at 60Hz in digital mode.
   Tilt/swivel stand
   Attributes provided: Color Flat-panel Monitor
   Attributes required: Graphics Adapter

   Note: Requires #2848, #2842, or #2843 be installed in the system.
   For 7043-150: (#3636)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3637) IBM T541H/L150p 15" TFT Color Monitors, Business Black, Captured Cable

(No Longer Available as of June 16, 2006)

The T541H and the L150p monitors have the following general characteristics: 

   Business Black color

   15-inch TFT LCD digital screen with a viewable image size of 381 mm (15.0 inches) measured diagonally, incorporating a 0.297 mm pixel pitch/type for bright, high-definition images.

   Designed to provide flicker free operation at a maximum resolution of 1024 x 768 pels at 75Hz in analog mode and 1024 x 768 pels at 60Hz in digital mode.

   Tilt/swivel stand

   Supports 2D Graphics Adapters only 

   Attributes provided: Color Flat-panel Monitor
   Attributes required: 2D Graphics Adapter
   For 7043-150: (#3637)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3638) - IBM C220p 21-inch Color Monitor, Business Black, and Cable

(No Longer Available as of June 24, 2005)

The IBM C220p monitor has the following general characteristics: 

   Business Black color
   21.0-inch Flat Aperture Grille CRT with a viewable image size of 508 mm (20.0 inches) measured diagonally, incorporating a 0.248 mm pixel pitch for bright, high-definition images.
   Designed to provide reduced flicker operation at an optimum and maximum supported addressability of 1600 x 1200 pels at up to 85 Hz (Vesa)non-interlaced. Capable of 2048 x 1636 at 75 Hz (Vesa).
   Tilt/swivel stand
   Dual input allows attachment to two systems concurrently.
   Depth: 483.6 mm (19.0 in.)
   Height: 516.4 mm (20.3 in.)
   Width: 512.8 mm (20.2 in.)
   Weight: 30.5 kg (67.2 lbs.) 

   Attributes provided: Color Monitor
   Attributes required: Graphics Adapter
   For 7043-150: (#3638)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3639) IBM ThinkVision L170p Flat Panel Monitor

(No Longer Available as of September 30, 2005)

The IBM ThinkVision L170p LCD flat-panel monitor has the following general characteristics: 

   Business color
   17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.264mm pixel pitch/type for bright, high-definition images.
   Maximum resolution of 1280 x 1024.
   Tilt/swivel and height adjustable stand
   Analog or digital connection
   Dual input allows attachment to two systems concurrently.
   Internal power
   Depth: 237.0 mm (9.3 in.)
   Height: 457.0 mm (18.0 in.)
   Width: 400.0 mm (15.7 in.)
   Weight: 5.7 kg (12.6 lbs.)
   Viewing angle: Vertical +/-85 degrees; horizontal +/-85 degrees
   Contrast ratio: 500:1 (typical)
   Video inputs: 15-pin D / DVI-D
   Two removable cables: one analog and one digital
   Attributes provided: Color Flat-panel Monitor
   Attributes required: Graphics Adapter
   For 7043-150: (#3639)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4 )
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

Note: Maximum of 1 #3639 for each installed graphics adapter. (#3640) - IBM ThinkVision L171p Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The IBM ThinkVision L171p LCD flat-panel monitor has the following general characteristics: 

   Business black color
   17.0-inch LCD digital screen with a viewable image size of 432 mm (17.0 inches) measured diagonally, incorporating a 0.280mm pixel pitch/type for bright, high-definition images.
   Maximum resolution of 1280 x 1024.
   Tilt/swivel and height adjustable stand
   Analog or digital connection
   Dual input allows attachment to two systems concurrently.
   Internal power
   Depth: 237.0 mm (9.3 in.)
   Height: 457.0 mm (18.0 in.)
   Width: 400.0 mm (15.7 in.)
   Weight: 5.7 kg (12.6 lbs.)
   Viewing angle: Vertical +/-75 degrees; horizontal +/-75 degrees
   Contrast ratio: 500:1 (minimal) 700:1 (typical)
   Video inputs: 15-pin D / DVI-D
   Two removable cables: one analog and one digital
   Attributes provided: Color Flat-panel Monitor
   Attributes required: Graphics Adapter
   For 7043-150: (#3640)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3642) - ThinkVision L191P Flat Panel Monitor

(No Longer Available as of June 16, 2006)

The ThinkVision L191p LCD flat-panel monitor has the following general characteristics: 

   Business black color
   19.0-inch LCD digital screen with a viewable image size of 483 mm (19.0 inches) measured diagonally, incorporating a 0.294mm pixel pitch/type for bright, high-definition images.
   Maximum resolution of 1280 x 1024.
   Tilt/swivel and height adjustable stand
   Analog or digital connection
   Dual input allows attachment to two systems concurrently.
   Internal power
   Depth: 237.0 mm (9.3 in.)
   Height: 457.0 mm (18.0 in.)
   Width: 408.0 mm (16.1 in.)
   Weight: 7.1 kg (15.7 lbs.)
   Contrast ratio: 1000:1 (typical)
   Video inputs: 15-pin D / DVI-D
   Two removable cables: one analog and one digital 

   Attributes provided: Color Flat-panel Monitor
   Attributes required: Graphics Adapter
   For 7043-150: (#3642)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No

(#3752) Service Package

(No Longer Available as of January 7, 2011)

This kit contains service publications, wrap plugs, and diagnostic CD-ROM. It also includes Maintenance Analysis Procedures (MAPs) that are not common to other RS/6000 systems. The "Diagnostics Information for Multiple Bus Systems" contains information common to all multiple bus system units and is used primarily for problem isolation by a customer's service specialist trained on the unit being serviced.

These publications are intended to be used in the customer's enterprise by the customer's own service specialists, and not by IBM Service personnel.

Two wrap plugs are included for use in diagnostic testing of the following connections to the system unit: 

   RS-232 serial I/O port
   parallel I/O port

This kit also contains system diagnostic CD-ROM, along with a test diskette, for use by the customer's service specialist (not by IBM Service personnel). 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#3752)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#3753) Options Library (hard copy)

(No Longer Available as of May 26, 2000)

This feature provides a hardcopy version of the options publications.

Also available via PUBORDER (SK2T-7452). 

   Attributes provided: Hardcopy of options publications
   Attributes required: None
   For 7043-150: (#3753)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: no max)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4149) 64MB SDRAM DIMM, 168PIN

(No Longer Available as of December 13, 1999)

Provides 64MB of system memory (ECC, SDRAM, 10ns) in a dual in-line Memory Module (DIMM) package. 

   Attributes provided: 64MB system memory
   Attributes required: 1 memory slot
   For 7043-150: (#4149)
       Minimum required: 0
       Maximum allowed: _4_ (Initial order maximum: _4_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4150) 128MB SDRAM DIMM, 168PIN

(No Longer Available as of December 10, 2004)

Provides 128MB of system memory (ECC, SDRAM, 10ns) in a dual in-line Memory Module (DIMM) package. 

   Attributes provided: 128MB of system memory
   Attributes required: 1 memory slot
   For 7043-150: (#4150)
       Minimum required: 0
       Maximum allowed: _4_ (Initial order maximum: _4_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4169) 256MB SDRAM DIMM, 168PIN

(No Longer Available as of December 10, 2004)

Provides 256MB of system memory (ECC, SDRAM, 10ns) in a dual in-line Memory Module (DIMM) package. 

   Attributes provided: 256MB of system memory
   Attributes required: 1 memory slot
   For 7043-150: (#4169)
       Minimum required: 0
       Maximum allowed: _4_ (Initial order maximum: _4_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4213) 13W3 to 15-Pin D-Shell Converter Cable

(No Longer Available as of July 31, 2001)

This converter cable allows a standard 15-pin display cable to be connected to a graphics adapter with a 13W3 connector. This feature is normally needed for use with displays that have an integrated (captured) cable with a 15-pin D-Shell connector (example: 8508, 631x, 632x, 952x displays). 

   Attributes provided: Connection to display with 15-pin D-Shell connector
   Attributes required: Graphics adapter with 13W3 connector
   For 7043-150:
       Minimum required: 0
       Maximum allowed: 1 per display
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4217) 6091 Attachment Cable

(No Longer Available as of July 31, 2001)

This display cable is required for attachment of an IBM 5081 or IBM 6091 display. The cable is 1.8 meters (6 ft) in length. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#4217)
       Minimum required: 0
       Maximum allowed: _1 per display(Initial order maximum: 1 per display)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4219) 6091-19i (77Hz - ISO) POWERdisplay 17, 19, 20 Monitor Cable

(No Longer Available as of September 8, 1999)

This cable provides three separate BNC connectors to allow IBM displays to attach to a graphics adapter with a 13W3 connector. This cable is only used with adapters that can recognize the V110 ID bits as indicating that a 77Hz monitor (ISO) is attached. 

   Attributes provided: Connection to display with 3 BNC connectors ID bits = V110
   Attributes required: Graphics adapter with 13W3 connector
   For 7043-150:
       Minimum required: 0
       Maximum allowed: 1 per display
       OS level required: None
       Initial Order:/MES/Both/Supported: Both

(#4223) Ethernet 10Base2 Transceiver

(No Longer Available as of June 25, 2004)

The 10Base2 Ethernet transceiver is compatible with Ethernet/IEEE 802.3 transceiver specifications and 10 MBps Ethernet CSMA/CD operation, to provide a connection to thin Ethernet coaxial cable (10Base2). It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10Base2. The medium connection is made through a BNC coaxial connector.

Features include: 

   Selectable SQE signal via external toggle switch
   Power LED
   Dimensions: 2-7/8 inches x 2-1/8 inches 

   Attributes provided: 1 Ethernet 10Base2 connection
   Attributes required: 1 Ethernet thick connection
   For 7043-150: (#4223)
       Minimum required: 0
       Maximum allowed: no max (Initial order maximum: no max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4224) Ethernet 10BaseT Transceiver

(No Longer Available as of July 31, 2001)

The Ethernet 10BaseT Transceiver provides the complete Attachment Unit Interface (AUI) to a twisted pair LAN connection. It is connected to a 15-pin DIX Ethernet connection via a transceiver (AUI) cable and converts the signal to 10BaseT. The medium connection is made through an RJ-45 receptacle.

Features include: 

   Selectable Link Test via external toggle switch
   Selectable SQE signal via internal jumper
   Five LEDs
       Transmit
       Receive/Link
       Collision
       Jabber 
   Dimensions: 2 7/8" x 2 1/8" 

   Attributes provided: 1 ethernet 10baseT connection
   Attributes required: 1 ethernet thick connection
   For 7043-150: (#4224)
       Minimum required: 0
       Maximum allowed: no max (Initial order maximum: no max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4235) 15 Pin-D Shell to 13W3 Display Cable

(No Longer Available as of September 8, 1999)

This cable attaches monitors with a 13W3 connector to a graphics adapter with a 15 Pin-D Shell connector. 

   Attributes provided: Connection to display with a 13W3 connector ID Bits 1010
   Attributes required: Graphics adapter with 15 Pin-D Shell connector
   For 7043-150: (#4235)
       Minimum required: 0
       Maximum allowed: no max (Initial order maximum: no max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4237) 13W3 to 15-pin DDC/ID Bits Switchable Display Cable

(No Longer Available as of December 3, 2001)

This cable attaches displays with 13W3 video connectors to graphics adapters with 15-pin connectors. There is a switch in the cable that is used to enable or disable Plug and Play. When disabled, ID Bits are presented to the attaching system. 

   Attributes provided: Connection between display and graphics adapter
   Attributes required: Graphics adapter with 15 pin D-shell connector
   For 7043-150: (#4237)
       Minimum required: 0
       Maximum allowed: 1 per display (Initial order maximum: 1 per display)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4238) DDC 15 Pin to 13W3 Display Cable

(No Longer Available as of December 3, 2001)

This converter cable attaches displays with a 13W3 connector that either are DDC (Display Data Channel) capable or do not need ID bits to a graphics adapter with a 15-pin D-shell connector. 

   Attributes provided: Connection between display and graphics adapter
   Attributes required: None
   For 7043-150: (#4238)
       Minimum required: 0
       Maximum allowed: 1 per display (Initial order maximum: 1 per display)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4239) 15-D Adapter to 3BNC ID Cable

(No Longer Available as of July 31, 2001)

This cable attaches displays with a 3BNC video connector to graphics adapters with a 15-pin D-shell connector. 

   Attributes provided: 1 display cable
   Attributes required:1 display and 1 graphics adapter
   For 7043-150: (#4239)
       Minimum required: 0
       Maximum allowed: 1 per display (Initial order maximum: 1 per display)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#4240) DDC 13W3 to 13W3 Display Cable

(No Longer Available as of July 31, 2001)

This cable attaches displays with a 13W3 video connector that are either DDC (Display Data Channel) capable or do not need I/O bits to a graphics adapter with a 13W3 connector. 

   Attributes provided: 1 display cable
   Attributes required: 1 display and 1 graphics adapter
   For 7043-150:
       Minimum required: 0
       Maximum allowed: 1 per display
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4241) 13W3 to 13W3 DDC/ID Bits Switchable Display Cable

(No Longer Available as of July 31, 2001)

This cable attaches displays with 13W3 video connectors to graphics adapters with 13W3 connectors. There is a switch in the cable to enable or disable plug-and-play. When disabled, I/O bits are presented to the attaching system. 

   Attributes provided: 1 display cable
   Attributes required: 1 display and 1 graphics adapter
   For 7043-150:
       Minimum required: 0
       Maximum allowed: 1 per display
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#4242) 6 Foot Extender Cable for Displays (15 pin D-shell to 15 pin D-shell)

This cable is required when ordering an appropriately supported monitor and adapter with a 15-pin "D" shell connector. 

   Attributes provided: 6-foot extension cable
   Attributes required: Supported monitor and adapter with a 15-pin "D" shell connector.
   For 7043-150: (#4242)
       Minimum required: 0
       Maximum allowed: 1 per display (Initial order maximum: 1 per display)
       OS level required: None
       Initial Order/MES/Both/Supported: MES

(#4348) PowerPC 604E 375MHz Pluggable Processor

(No Longer Available as of September 22, 2004)

This feature provides a 604E 375MHz pluggable processor 

   Attributes provided: CPU
   Attributes required: PGA Socket
   For 7043-150: (#4348)
       Minimum required: 1
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Initial

(#4363) PowerPC 604e 250MHz Processor

(No Longer Available as of December 10, 2004)

This feature provides a 1-way 604e 250MHz processor and 1MB of L2 cache. 

   Attributes provided: CPU
   Attributes required: None
   For 7043-150: (#4363)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: AIX Version 4.2.1 or 4.3.2, or later
       Initial Order/MES/Both/Supported: Initial

(#4951) IBM Four Port 10/100 Ethernet Adapter

(No Longer Available as of December 10, 2004)

IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter for RS/6000 is a single slot, long, 64-bit 33 MHz PCI adapter supporting 4 industry standard Ethernet 10Base-T or 100 Base-T interfaces either half or full duplex. Each port is provided with it's own RJ-45 connector for attachment to standard CAT-3/5 Unshielded Twisted Pair, UTP cable. The adapter is IEEE 802.3u compatible and provides full auto-negotiation for detecting speed and duplex capability across each port.

Network boot capability and Network Install Manager (NIM) capability are available using this adapter if no specific limitation is stated.

The IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) should be considered where maximum port density is required per I/O card slot. But, for high end systems, where card slots are not the limiting factor and maximum throughput is required, the single port IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968) are the preferred solutions.

Below are some performance factors to consider when choosing the right adapter for your needs. These performance comparisons are based on all four ports of the IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) being active. 

   With all four ports under full bandwidth conditions, a single IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) is expected to deliver up to 3 times the comparable performance of a single IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968).
   Under most conditions, each port of the IBM 4-Port 10/100 Base-Tx Ethernet PCI Adapter (#4951) is expected to perform at greater than 50% the throughput of the single port of the IBM 10/100 Mbps Ethernet PCI Adapter II (#4962) or 10/100 Mbps Ethernet PCI Adapter (#2968).

Note: The resulting performance in your environment compared to the above may vary and depends upon the RS/6000 model, the I/O configuration, and associated workload of your applications. 

   Attributes provided:
   Attributes required:
   For 7043-150: (#4951)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX version 4.3.3, 2/2000 update CD or later
       Initial Order/MES/Both/Supported: Both

(#4958) PCI Cryptographic Coprocessor

(No Longer Available as of December 3, 2001)

The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software to provide high performance secure hardware engines for secure transactions such as secure data exchange, verifying electronic signatures, bulk data encryption and decryption. Cyrptographic processes are performed within a tamper proof enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3.

Security functions supported by the adapter includes: 

   Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre-and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption.
   Message Authentication (MAC) and financial PIN processing
   Triple DES encryption and decryption of general data
   Secure RSA key-pair generation
   RSA signature generation and signature verification
   Secure Hashing Algorithm (SHA-1) in hardware
   Hardware random number generation
   Secure data storage and retrieval
   Other non-cryptographic security utilities can be carried out using the onboard processor

IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards website: 

   PKCS #11 Version 2.01, an implementation of the industry-standard API
   IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to Web site http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page: 

   http://www.ibm.com/security/cryptocards

Limitations: 

   The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.
   AIX support for this adapter is limited to the 32-bit kernel only. (AIX 64-bit kernel does not support this adapter.)

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: 

   http://www.ibm.com/servers/aix/os/adapters/51.html 

   Attributes provided: Data encryption via PCI bus to host
   Attributes required: 1 PCI slot
   For 7043-150: (#4958)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX Version 4.3.3 with 4330-05 Recommended Maintenance Package or later, AIX Version 5.1 or later.
       Initial Order/MES/Both/Supported: Both

(#4953) - IBM 64bit/66MHz PCI ATM 155 UTP Adapter

(No Longer Available as of December 17, 2004)

The IBM 64bit/66MHz PCI ATM 155 UTP Adapter provides dedicated, 155 Mbps full-duplex connection to ATM networks over either permanent virtual circuits (PVC) or switched virtual circuits (SVC). This adapter enables TCP/IP to run over an ATM network with Category-5 Unshielded Twisted Pair (UTP). It also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN. 

   Attributes provided: One ATM 155 UTP connector
   Attributes required: One PCI slot
   For 7043-150: (#4953)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
       Initial Order/MES/Both/Supported: Both

(#4957) - IBM 64bit/66MHz PCI ATM 155 MMF Adapter

(No Longer Available as of March 31, 2006)

The IBM 64bit/66MHz PCI ATM 155 MMF Adapter provides direct access to ATM networks. This 155 Mbps PCI ATM MMF Adapter provides dedicated 155 Mbps full-duplex connection using permanent virtual circuits (PVC) or switched virtual circuits (SVC) and enables TCP/IP to run over an ATM network. The adapter also supports communication with devices located on an ATM network or bridged to a Token-Ring, Ethernet, or other LAN.

This 155 Mbps PCI MMF ATM Adapter is compatible with: 

   IBM 8285 ATM Workgroup Switch
   IBM 8260 ATM Subsystem
   IBM 8282 ATM Concentrator
   IBM 8281 ATM LAN Bridge 

   Attributes provided: One ATM 155Mbps MMF connection
   Attributes required: One PCI slot
   For 7043-150: (#4957)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
       Initial Order/MES/Both/Supported: Both

(#4959) IBM Token-Ring PCI Adapter

(No Longer Available as of March 31, 2006)

The IBM Token-Ring PCI Adapter for RS/6000 is a single slot, short, 32-bit PCI adapter supporting 4 and 16 Mbps data rates, either half- duplex or full-duplex.

Automatic Ring-Speed selection is designed to prevent "wrong speed" insertion into the ring, even when connected to speed-sensing switches. This adapter will operate with either unshielded twisted pair (UTP) Cat. 5 cable with RJ-45 connectors or shielded twisted pair (STP) Type 1A cabling with 9-pin D-shell connectors. The High-Speed Token-Ring PCI Adapter will provide network boot capability. 

   Attributes provided: PCI Token-Ring Adapter
   Attributes required: PCI Bus Slot
   For 7043-150: (#4959)
       Minimum required: 0
       Maximum allowed: _4_ (Initial order maximum: _4_)
       OS level required: AIX Version 4.2.1 or Version 4.3.3, or later
       Initial Order/MES/Both/Supported: Both

(#4960) IBM e-business Cryptographic Accelerator

(No Longer Available as of May 31, 2006)

The IBM e-business Cryptographic Accelerator is a short form factor PCI Secure Socket Layer (SSL) hardware accelerator adapter. For Secure Web transaction, SSL operations is a key requirement. To do this, public-key cryptographic operations using SSL handshake protocol is employed. The IBM e-business Cryptographic Accelerator is a hardware cryptographic solution that off-loads this compute-intensive public-key cryptographic processing from the host.

The overall operation control, including command decoding, is implemented in hardware and requires no on-card microprocessor subsystem. As such, the adapter is a less expensive alternative to those who do not need the high security of the on-card secure programming environment such as is offered by the PCI Cryptographic Coprocessor(#4958), but do need the high cryptographic performance that hardware acceleration provides by offloading the host processor.

Note: The IBM e-business Cryptographic Accelerator is only supported by the industry standard PKCS #11 application programming interface (API) Version 2.01, and applications which interface to the PKCS #11 Support Program. 

   Attributes provided: Data encryption via PCI bus to host
   Attributes required: 1 PCI slot
   For 7043-150: (#4960)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-13 or later, AIX 5.1 with AIX Update CD LCD4-1103-00 or later.
       Initial Order/MES/Both/Supported: Both

(#4962) - 10/100 Mbps Ethernet PCI Adapter II

(No Longer Available as of March 31, 2006)

The 10/100 Mbps Ethernet PCI Adapter II is a small form factor, single port PCI ethernet adapter. This high performance, low power ethernet 10/100Mbps LAN adapter can be used in both client and server PCI systems. The 10/100 Mbps Ethernet PCI Adapter II provides both 10Base-T and 100Base-TX full duplex ethernet LAN connectivity. The adapter supports Category-5 unshielded twisted pair cabling for both 10/100 Mbps and Category-3 unshielded twisted pair cabling for 10 Mbps. The 10/100 Mbps Ethernet PCI Adapter II supports:

After 4/26/02, the 10/100 Mbps Ethernet PCI Adapter II supports the off-load of IP Security cryptographic algorithms by providing hardware assistance in performing data encryption and authentication. This support is provided with AIX 5.1 (with appropriate software updates) and later software. This IP Security function, normally performed with encryption software by the host, is off-loaded to this adapter to enhance network traffic throughput and reduce CPU utilization. If you are running with AIX 5.1, to invoke the IP Security function on the adapter, you must obtain AIX 5.1 software updates IY27069 and IY26514 or the 5100-02 Recommended Maintenance package. These updates can be obtained by ordering APAR IY28102, or by ordering the AIX 5.1 Update CD (LCD4-1103-03) dated 4/2002 or later.

Note: This IP Security function is not supported with AIX 4.3 software. 

   Half / Full Duplex 10/100 Mbps Ethernet interface
   10/100 Mbps data rates
   Auto-negotiation for 10/100 speed and half/full duplex
   Network boot capability and Network Install Manager (NIM)
   IEEE 802.3 Ethernet Specification
   IEEE 802.3u Fast Ethernet Specification
   Attributes provided: One 10/100 Mbps Ethernet port (connector)
   Attributes required: One PCI slot
   For 7043-150: (#4962)
       Minimum required: 0
       Maximum allowed: 4 (Initial order maximum: 4)
       OS level required: AIX 4.3.3 with AIX product CD LCD4-0286-07 and AIX Update CD LCD4-0995-14 or later, AIX 5.1 with AIX product CD LCD4-1061-01 and AIX Update CD LCD4-1103-01 or later.
       Initial Order/MES/Both/Supported: Both

An additional function called 'Large Send' or sometimes known as TCP Segmentation is also available. This function offloads the TCP segmentation operation from the AIX IP layer to the adapter for outgoing (transmit side) TCP segments. Another function known as "Checksum Offload" which offloads the TCP/UDP Checksum Operation or workload from the CPU to the adapter is also available. Both of these functions are available with AIX version 5.1 with APAR IY38248 or later software, or AIX version 5.2 with APAR IY38492 or later software. (#4963) - PCI Cryptographic Coprocessor (FIPS-4)

(No Longer Available as of February 8, 2005)

The PCI Cryptographic Coprocessor (FIPS-4) is a 2/3 length PCI adapter which combines hardware and software to provide a wide variety of security services. The PCI Cryptographic Coprocessor (FIPS-4) is a second generation adapter of the Cryptographic Coprocessor family that provides high performance secure hardware engines for secure Internet transactions such as transmitting data, verifying electronic signatures, bulk data encryption and decryption. In addition, the card is enclosed in a tamper proof enclosure to restrict access to on card resources, designed to FIPS 140-1 Level 4 standards.

Security functions supported by the adapter include: 

   DES (Data Encryption Standard) (40 and 56 bit key) encryption and decryption, with pre-and post-padding; the coprocessor uses both ECB (electronic and codebook) and CBC (cipher block chain) modes of encryption.
   MAC (Message Authentication) generation and MAC verification services
   Triple DES (three key) encryption and decryption of eight-byte units
   Secure RSA key-pair generation
   RSA signature generation and signature verification at 18 signatures/sec at 2048 bits
   Hardware random number generation
   Secure data storage and retrieval
   Other non-cryptographic security utilities can be carried out using the onboard processor

As part of this adapter's physical security features, the following events will cause an adapter shutdown and secure data zeroization. 

   Shipping/Storage Temperature less than -15C or greater than 95C
   Dead Battery (VBAT less than 2.4V)
   Supply Voltage greater than 3.3V/12V max
   Mesh Sensor opens/shorts detection
   X-ray exposure

IBM offers software to enable your use of the coprocessors. Two different approaches to cryptographic functions are offered for download from the http://www.ibm.com/security/cryptocards Web site: 

   PKCS #11 Version 2.01, an implementation of the industry-standard API
   IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to Web site http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page: 

   http://www.ibm.com/security/cryptocards

Limitations: 

   The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements. 

   Attributes provided: Data encryption via PCI bus to host
   Attributes required: 1 PCI slot
   For 7043-150: (#4963)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with 4330-08 Recommended Maintenance Package or later, AIX 5.1 or later.
       Initial Order/MES/Both/Supported: Both

(#4964) PCI Cryptographic Coprocessor

(No Longer Available as of May 31, 2006)

The IBM PCI Cryptographic Coprocessor is a 2/3 length PCI adapter combining hardware and software designed to provide high performance hardware engines for secure internet transactions such as data exchange, verifying electronic signatures, bulk data encryption and decryption. Cryptographic processes are performed within a tamper resistant enclosure on the adapter that is designed to meet FIPS PUB 140-1 standard for commercial cryptographic devices at Level 3.

Security functions supported by the adapter includes: 

   Data Encryption Standard (DES) (56 and 40 bit keys) encryption and decryption, with pre- and post-padding; the coprocessor uses both electronic and codebook (ECB) and cipher block chain (CBC) modes of encryption.
   Message Authentication (MAC) and financial PIN processing
   Triple DES encryption and decryption of general data
   RSA key-pair generation
   RSA signature generation and signature verification
   Secure Hashing Algorithm (SHA-1) in hardware
   Hardware random number generation
   Protected data storage and retrieval
   Other non-cryptographic security utilities can be carried out using the onboard processor

IBM offers software to enable your use of the Coprocessors. Two different approaches to cryptographic functions are offered for download from: 

   http://www.ibm.com/security/cryptocards 

   PKCS #11 Version 2.01, an implementation of the industry-standard API
   IBM Common Cryptographic Architecture (CCA), featuring support of special interest to the finance industry.

Under custom contract, IBM also offers toolkits that you can employ to develop extensions to the CCA offering and to develop your own application to exploit the secure computing environment and cryptographic hardware. For more information on custom contracts, refer to: 

   http://www.ibm.com/security/cryptocards.

For additional information on the IBM PCI Cryptographic Coprocessor, refer to the following World Wide Web page: 

   http://www.ibm.com/security/cryptocards

Limitations: 

   The IBM PCI Cryptographic Coprocessor Adapter is a field only installed device in order to meet restrictive shipping requirements.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: 

   http://www.ibm.com/servers/aix/os/adapters/51.html 

   Attributes provided: Data encryption via PCI bus to host
   Attributes required: 1 PCI slot
   For 7043-150: (#4964)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2 )
       OS level required: AIX V4.3.3 with 4330-08 Maintenance Package or 5.1 or higher. For Linux informaion, refer to:

       http://www.ibm.com/servers/eservers/pseries/hardware/
       factsfeatures.html
        

       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#5001) Customer Service Specify

(No Longer Available as of November 27, 2009)

This feature code specifies that the system will receive special request services from the Center for Customer Services (CCS) in Rochester. 

   Attributes provided: Customization
   Attributes required: None
   For 7043-150: (#5001)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#5005) Software Preinstall

Licensed programs may be preinstalled on the media selected. To order this option, specify code (#5005) on the initial system order. The preinstalled licensed programs will be at the same release level as programs being shipped from the Program Libraries at the time the system is manufactured. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#5005)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#6041) 3-Button Mouse

(For IBM, No Longer Available as of March 26, 2004)

The 3-Button Mouse is a dynamic tracking pointing device which utilizes Opto-mechanical technology. Resolution is 320 DPI. A 2.74 meter (9 ft) attachment cord is included. 

   Attributes provided: Mouse capability
   Attributes required: 1 Mouse Port
   For 7043-150: (#6041)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology

(No longer available as of February 29, 2008)

The IBM 80/160 GB Internal Tape Drive with VXA** Technology is a 5.25-inch, half-high, Ultra2 LVD 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses VXAtape** data cartridges and is compression capable, providing a capacity of up to 160 GB - a significant increase in capacity over the previous internal tape drives.

The (#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology, is limited to a maximum system ambient operating temperature of 24C (75.2 F) at a maximum operating altitude of 2134 m (7000 ft.). Lower altitudes have higher maximum ambient operating temperatures. Refer to the "IBM Site and Hardware Planning Information Guide" (SA38-0508) for additional details.

Characteristics: 

   Capacity: 80 GB native mode, 160 GB (typical) compression mode
   Form Factor: 5.25-inch half high
   Media: uses VXAtape data cartridges
   Technology: Helical scan, rotating head
   Operation: Streaming
   Data Transfer Rate: 6MBps native mode, 12MBps (typical) compression
   Interface: SCSI-2 (LVD/SE) asynchronous/synchronous
   Compatability: 80 GB mode (Read/Write), 160 GB compression (Read/Write)
   Attributes provided: One 80/160 GB internal tape drive
   Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal 16-bit address
   For 7043-150: (#6120)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.3 or later, AIX 5.1 or later, AIX 5.2 or later
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No 

   Note: The (#6120) IBM 80/160 GB Internal Tape Drive with VXA Technology is limited to a maximum system ambient operating temperature of 24 C (75.2 F) at a maximum operating altitude of 2134 m (7000 ft). Lower altitudes have higher maximum ambient operating temperatures. Refer to the 7043 model 150 system planning guide for additional details.

(#6134) 60/150 GB 16-bit 8mm Internal Tape Drive

(No Longer Available as of March 31, 2005)

The 60/150GB 16-bit 8mm Internal Tape Drive consists of a 5.25-inch half-high, 16-bit tape drive. This drive provides a high capacity tape drive for save/restore and archiving functions. This tape drive uses IBM 8mm data cartridges and is compression capable, providing a capacity of up to 150 GB -- up to 375% increase over the previous 20/40GB 8mm internal tape drive.

The (#6134) 60/150 GB 16-bit 8mm Internal Tape Drive, is limited to a maximum system ambient operating temperature of 22C (71.6 F) at a maximum operating altitude of 2134 m (7000 ft.). Lower altitudes have higher maximum ambient operating temperatures. Refer to the "IBM Site and Hardware Planning Information Guide" (SA38-0508) for additional details.

Characteristics: 

   Capacity: 60 GB Native Mode, 150 GB (typical) Compression Mode
   Form Factor: 5.25-inch Half-high
   Media: IBM 8mm Data Cartridge with Smart Clean Technology
   Technology: Helical Scan, Rotating Head
   Operation: Streaming
   Data Transfer Rate: 12 MB/Sec. Native Mode, 30 MB/Sec. (typical) Compression M
   Interface: SCSI-2 16-bit Low Voltage Differential(LVD) / Single-ended (SE) Asynchronous/Synchronous
   Compatibility: See the following Technical Support Web page (8mm Tape Interchange Information section) for compatability information: 

   http://techsupport.services.ibm.com/server/mdownload/ tapewhdr.html 

   Attributes provided: 60/150GB 16-bit 8mm Internal Tape Drive
   Attributes required: One 1.6-inch(41mm) half-high media bay and one SCSI-2 internal 16-bit address
   For 7043-150: (#6134)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.3.3 or later, AIX 5.1 or later, AIX 5.2 or later
       Initial Order/MES/Both/Supported: Both
       CSU: Yes
       Return parts MES: No 

   Note: The (#6134) 60/150 GB 16-bit 8mm Internal Tape Drive is limited to a maximum system ambient operating temperature of 22 C (71.6 F) at a maximum operating altitude of 2134 m (7000 ft). Lower altitudes have higher maximum ambient operating temperatures. Refer to the 7043 model 150 system planning guide for additional details.

(#6158) 20/40GB 4mm Internal Tape Drive

(No Longer Available as of May 31, 2006)

The 20/40 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 16-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 40 GB - a significant increase in capacity over the previous 12/24 4-mm internal tape drives (when using DDS-4 media).

Characteristics 

   Capacity: 20 GB native mode, 40 GB (typical) compression mode
   Form Factor: 5.25-inch half high
   Media: IBM 4-mm DDS-4 data cartridge
   Technology: Helical scan, rotating head
   Operation: Streaming
   Data Transfer Rate: 3MBps native mode, 6MBps (typical) compression
   Interface: SCSI-2 (single ended) asynchronous/synchronous
   Compatibility: 4 GB mode (Read/Write), 8 GB compression (Read/Write), 12 GB mode (Read/Write), 24 GB compression (Read/Write), 20 GB mode (Read/Write), 40 GB compression (Read/Write)

Note: MES orders are shipped with both a black and a white bezel. 

   Attributes provided: 4mm tape capability
   Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 16-bit address
   For 7043-150: (#6158)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.3.3 or later
       Initial Order/MES/Both/Supported: Both

(#6159) 12/24GB 4mm Internal Tape Drive

(No Longer Available as of April 26, 2002)

The 12/24 GB 4-mm Internal Tape Drive is a 5.25-inch, half-high, single-ended 8-bit tape drive, which provides a high capacity for save/restore and achieve functions. This tape drive uses IBM 4-mm data cartridges and is compression capable, providing a capacity of up to 24 GB - a significant increase in capacity over the previous 4/8 4-mm internal tape drives (when using DDS-3 media).

Characteristics 

   Capacity:
       12 GB native mode,
       24 GB (typical) compression mode 
   Form Factor: 5.25-inch half high
   Media: IBM 4-mm DDS-3 data cartridge
   Technology: Helical scan, rotating head
   Operation: Streaming
   Data Transfer Rate:
       1.1 MBps native mode,
       2.2 MBps (typical) compression 
   Interface: SCSI-2 (single ended) asynchronous/synchronous
   Compatibility:
       2 GB mode (Read/Write), 4 GB compression (Read/Write);
       4 GB mode (Read/Write), 8 GB compression (Read/Write);
       12 GB mode (Read/Write), 24 GB compression (Read/Write) 
       Attributes provided: 4mm tape capability
       Attributes required: One 1.6-inch (41mm) half-high media bay and one SCSI-2 internal SE 8-bit address
       For 7043-150: (#6159)
           Minimum required: 0
           Maximum allowed: _1__ (Initial order maximum: _1__)
           OS level required: AIX 4.2.1, AIX 4.3.2 or later
           Initial Order/MES/Both/Supported: Both

Note: MES orders are shipped with both a black and a white bezel. (#6203) - PCI Dual Channel Ultra3 SCSI Adapter

(No Longer Available as of December 10, 2004)

The PCI Dual Channel Ultra3 SCSI Adapter (#6203) is a 64 bit adapter and is an excellent solution for high performance SCSI applications. The PCI Dual Channel Ultra3 SCSI Adapter provides 2 SCSI channels (busses). Each SCSI bus can either be internal (on systems that support internal SCSI device or backplane attachments) or external and will support a data rate of up to 160 MBytes per second, up to twice the maximum data transfer rate of the previous Dual Channel Ultra2 SCSI adapter (80 MBytes per second).

In order to achieve an Ultra3 SCSI bus data rate of up to 160 MBytes per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. To fully utilize this Ultra3 160 MBytes per second performance, all attaching devices or subsystems should also be Ultra3 LVD devices. But, if Ultra2 and Ultra3 devices coexist on the same bus, each device will operate at its rated speed. For lower speed single-ended (SE) devices, the SCSI bus will switch to single-ended (SE) performance and interface at the lower SE bus data rate of the device.

Two industry-standard VHDCI 68 pin connectors are mounted on the adapter's end bracket, allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68 pin, (#2118) can be used with older external SE subsystems to allow connection to the VHDCI connector on the PCI Dual Channel Ultra3 SCSI Adapter.

Note: If any Single Ended (SE) SCSI subsystem is attached to an external port of this adapter, the SCSI port will auto-throttle to a "Fast" interface speed running no faster than 20MB/s max. This auto-throttle function is performed to ensure best signal quality between host adapter and attaching subsystem. The second external port is unaffected unless a SE subsystem is also attached to it. If so, it would also auto-throttle as described above.

The PCI Dual Channel Ultra3 SCSI Adapter (#6203) also is a native boot adapter with AIX 4.3.3 or AIX 5.1 (with appropriate updates) in the supported pSeries or RS/6000 systems. 

   Attributes provided: Attachment of internal SCSI devices (on systems that support an internal SCSI device or backplane attachment with this adapter) and external SCSI devices
   Attributes required: One available PCI slot
   For 7043-150: (#6203)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.3.3 with AIX Update CD LCD4-0995-14 or later, AIX 5.1 with Update CD LCD4-1103-01 or later
       Initial Order/MES/Both/Supported: Both

(#6205) PCI Dual Channel Ultra2 SCSI Adapter

(No Longer Available as of December 3, 2001)

The PCI Dual Channel Ultra2 SCSI Adapter (#6205) is a 64 bit adapter and is an excellent solution for high performance SCSI applications. The PCI Dual Channel Ultra2 SCSI Adapter provides 2 SCSI channels (busses). Each SCSI bus can either be internal or external and will support a data rate of up to 80 MB per second, up to twice the maximum data transfer rate of previous Ultra SCSI adapters (40 MB per second).

In order to achieve an Ultra2 SCSI bus data rate of up to 80 MB per second and also maintain a reasonable drive distance, the adapter utilizes Low Voltage Differential (LVD) drivers and receivers. In order to utilize this Ultra2 80 MB per second performance, all attaching devices or subsystems must also be Ultra2 LVD devices. If any device is not Ultra2 LVD, the adapter will switch its SCSI bus to single-ended (SE) performance and interface at the lower SE SCSI bus data rate of the device.

Two industry standard VHDCI 68 pin connectors are mounted on the adapter's end bracket allowing attachment of various LVD and SE external subsystems. A .3 meter converter cable, VHDCI to P, Mini-68 pin to 68 pin, (#2118) can be used with older external SE subsystems to allow connection to the VHDCI connector on the PCI Dual Channel Ultra2 SCSI Adapter.

Note: If any Single Ended (SE) SCSI subsystem is attached to an external port of this adapter, the SCSI ports (both the external port being attached to and its associated or shared internal port) will auto- throttle to a "Fast" interface speed running no faster than 20MB/s max. This auto-throttle function is performed to ensure best signal quality between host adapter and attaching subsystem. The second external port and its associated or shared internal port is unaffected unless a SE subystem is also attached to it. If so, it would also auto-throttle as described above.

Any supported RS/6000 system can be set up to boot from PCI Dual Channel Ultra2 SCSI Adapter (#6205). If you are running with AIX 4.3.3 or later software, this adapter has native boot support as part of that level of AIX software. If you are running with 4.2.1 software, the below procedure applies in order to boot using the PCI Dual Channel Ultra2 SCSI Adapter: 

   The designated boot SCSI disk can be located under the covers of a processor unit or in an external SCSI storage unit.
   AIX version 4.2.1 must be loaded to the designated SCSI boot disk using AIX's Network Install Manager (NIM) before booting from the SCSI boot disk.
   The system with a designated SCSI boot disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
   Once AIX with updates is installed on the designated SCSI boot disk and the system is configured for booting, booting will take place from the boot disk drive without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time. 

   Attributes provided: Attachment of internal and external SCSI devices
   Attributes required: One available PCI slot
   For 7043-150: (#6205)
       Minimum required: 0
       Maximum allowed: 2 (Initial order maximum: 2)
       OS level required: AIX 4.2.1, or AIX 4.3.3 or later
       Initial Order/MES/Both/Supported: Both

(#6206) PCI Single-Ended Ultra SCSI Adapter

(No Longer Available as of December 10, 2004)

The PCI Single-Ended Ultra SCSI Adapter (#6206) is an ideal solution for applications requiring large block data transfers (>64K block size) in a multi disk drive environment utilizing SCSI-2 protocol. FC #6206 has a maximum data transfer rate of 40 MBytes per second which is twice the maximum data transfer rate of SCSI-2 Fast/Wide adapters (20 MBytes per second). The PCI Single-Ended Ultra SCSI Adapter (#6206) conforms to the SCSI-2 standard and Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048).

Note: If any Single Ended (SE) SCSI subsystem is attached to the external port of this adapter, the SCSI ports (both external and internal) will auto-throttle to a "Fast" interface speed running no faster than 20MB/s max. This auto-throttle function is performed to ensure best signal quality between host adapter and attaching subsystem.

Limitation: Attachment of the IBM 2104 models DL1, TL1, DU3, or TU3 external disk subsystems to the external connector of this SCSI adapter is not supported when any device(s) are attached to the internal connector of the same adapter. 

   Attributes provided: 15 internal or 15 external SCSI-2 addresses
   Attributes required: 1 PCI slot.
   For 7043-150: (#6206)
       Minimum required: 0
       Maximum allowed: _2__ (Initial order maximum: _2__)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6207) PCI Differential Ultra SCSI Adapter

(No Longer Available as of December 10, 2004)

The PCI Differential Ultra SCSI Adapter is the next generation of SCSI-2 performance with maximum data transfer rates of 40 MBytes per second. Feature code # 6207 allows connection to external differential SCSI-2 F/W or Ultra SCSI type devices up to 25 meters away. Feature code # 6207 will negotiate with each external device and transfer data at the fastest SCSI data transfer rate capable by the external device. Some external Differential Ultra SCSI devices include the 7137 Disk Array Subsystem models (check sales pages) and certain External Disk Drive Models of the 7204.

The adapter conforms to SCSI-2 standard and the Fast-20 (Ultra) documentation. Industry standard 68 pin connectors are incorporated (SCSI "P" connector definition of X3T9.2/90-048). 

   Attributes provided: 15 external SCSI-2 addresses
   Attributes required: 1 PCI slot.
   For 7043-150: (#6207)
       Minimum required: 0
       Maximum allowed: _2__ (Initial order maximum: _2__)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6215) PCI SSA Multi-Initiator/RAID EL Adapter

(No Longer Available as of September 8, 1999)

The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, can be configured as either a two initiator non-RAID, or one initiator RAID adapter. After June 30, 1998, new microcode will allow FC #6215 to be configured as either a eight initiator non-RAID, or two initiator RAID adapter. It also has been enabled to support an optional 4 MByte Fast-Write Cache card that improves write performance in both RAID 5 or Non-RAID (one initiator configurations) operations. The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, has four ports, two SSA loops, and a supported configuration of 48 SSA disk drives per loop or 96 SSA disk drives per FC #6215. The adapter supports target mode operations and HACMP.

The PCI SSA Multi-Initiator/RAID EL Adapter, FC #6215, when operated in a RAID 5 configuration will support (2+P) to (32+P) arrays and up to 6 (15+P) arrays. The adapter also supports Hot Spares in RAID 5 mode.

All models of the 7133 are supported as well as the 7131-405 and internal RS/6000 SSA disk drive configurations. The SSA Fiber-Optic Extender is also supported.

Note: After June 30, 1998, all current customers with a PCI or the Micro Channel SSA Multi-Initiator/RAID EL Adapter may obtain the enhancement upgrade microcode by downloading the code from the following Internet URL: http://www.rs6000.ibm.com/support/micro/download.html

If downloading from the Web is not convenient or available, upgrade microcode on CD-ROM can be obtained after June 30, 1998 by ordering RPQ 8A1096.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes provided: RAID attach capability
   Attributes required: One PCI adapter slot
   For 7043-150: (#6215)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems.

These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system. 

   http://www.hursley.ibm.com/ssa/

Contains links to SSA publications and other SSA Web sites, including the one below. 

   http://www.hursley.ibm.com/ssa/rs6k/

Contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments. (#6222) SSA Fast-Write Cache

(No Longer Available as of October 17, 2001)

The SSA Fast-Write Cache Option Card, FC #6222, is a 4 MByte fast- write optional feature that will plug into either SSA Multi-Initiator/RAID EL Adapter (FC #6215 or FC #6219). It utilizes non- volatile RAM and has a data memory retention of over seven years. During the unlikely event of an SSA Multi-Initiator/RAID EL Adapter failure, a new SSA Multi-Initiator/RAID EL Adapter can be installed and the SSA Fast-Write Cache Option Card (FC #6222) can be removed from the failing adapter and installed in the new SSA Multi-Initiator/RAID EL Adapter insuring data integrity and continuous operation.

The SSA Fast-Write Cache Option Card (#6222) can provide as much as a 10-times improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the SSA Fast-Write Cache. The response time and data transfer improvement using the option card (#6222), will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model and application parameters.

The SSA Fast-Write Cache Option Card (#6222) plugged into either SSA Multi-Initiator/RAID EL Adapter (#6215 or #6219) will operate in either Non-RAID or RAID 5 mode, in a one initiator configuration.

Limitation: AIX 5.1 or later support for this adapter is limited to the 32-bit kernel only. (AIX 5.1 or later 64-bit kernel does not support this adapter.) 

   Attributes required: Adapter (#6215) or (#6219)
   For 7043-150: (#6222)
       Minimum required: 0
       Maximum allowed: 1 per adapter (Initial order maximum: 1 per adapter)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: MES

(#6225) Advanced SerialRAID Adapter

(No Longer Available as of May 8, 2000)

The Advanced SerialRAID Adapter (#6225) is a 4-port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MB per second per loop. It also provides eight-initiator, non-RAID capability, or two-initiator RAID 5 capability. The adapter accepts a 32 MB SSA Fast-Write Cache Option Card (#6235) that can improve write performance in both RAID 5 and non-RAID one-initiator applications. The Advanced SerialRAID Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. The adapter also supports Hot Spares in RAID 5 mode. The Advanced SerialRAID Adapter also supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (Refer to IBM 7133 Sales literature for additional information)

Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Adapter (#6225), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX Version 4.3.3 or later software, native boot capability is supported as part of AIX Version 4.3.3 or later software. If your system is running with AIX Version 4.2.1 or AIX Version 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter: 

   The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit.
   A supported AIX version of software (with the proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk.
   The system with the non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
   Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the non-RAID SSA disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.

The Advanced SerialRAID Adapter (#6225) can be field updated via a code download to obtain enhanced functions as the Advanced SerialRAID Plus Adapter (#6230). Go to the Advanced SerialRAID Plus Adapter (#6230) description for details of these additional functions, enhancements, and AIX requirements. Refer to the below web site for information to determine how to obtain a download of this code enhancement upgrade. In addition to the code enhancement upgrade, a 128 MByte DRAM Option Card (#6231) is available as a field installable option to the Advanced SerialRAID Adapter (#6225). See the 128 MByte DRAM Option Card (#6231) for information about this option.

When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system. 

   http://www.storage.ibm.com/hardsoft/products/ssa/

The above link contains links to SSA publications and other SSA Web sites, including the one below. 

   http://www.storage.ibm.com/hardsoft/products/ssa/rs6k /index.html

The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.

Limitation: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported. 

   Attributes provided: Attachment of SSA devices
   Attributes required: One PCI bus slot
   For 7043-150 (#6225)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 0)
       OS level required: AIX Version 4.2.1, 4.3.2, or later
       Initial Order/MES/Both/Supported: MES

Note: AIX Version 4.2.1 and 4.3.2 require updates to operate properly. An update CD-ROM (9903 or later) contains these updates. Refer to AIX Version 4.2 or 4.3 (5765-C34) for information on how the latest level can be obtained. (#6230) Advanced SerialRAID Plus Adapter

(No Longer Available as of June 24, 2005)

The Advanced SerialRAID Plus Adapter (#6230) is a 4 port (2 loop) Serial Storage Architecture (SSA) adapter providing an instantaneous data transfer rate of up to 160 MByte/s per loop. It also provides eight- initiator, non-RAID capability, two-initiator RAID 1, two-initiator RAID 0+1, two-initiator RAID 5, or one-initiator RAID 0 capability. The adapter accepts a 32 MByte Fast-Write Cache Option Card (#6235) that improves write performance in RAID 0+1, RAID 5, and non-RAID applications. When the 32 MByte Fast-Write Cache Option Card is used, the adapter can be configured in either single or dual initiator fast- write cache mode. In dual initiator fast-write cache mode, if one of the two adapters fail, the failing adapter transfers control over to the other. Also, in dual initiator Fast Write Cache mode, the 128 MByte DRAM Option Card (#6231) is available and required to utilize the full 32 MBytes of fast-write cache on the adapters. If the 128 MByte DRAM Option Card is not used in dual initiator fast-write cache mode, the effective fast-write cache capacity will be 16 MBytes on each adapter. See the 128 MByte DRAM Option Card (#6231) for information.

The Advanced SerialRAID Plus Adapter when operated in a RAID 5 configuration will support (2+P) to (15+P) arrays and up to 6 (15+P) arrays. When operated in a RAID 1 or RAID 0+1 configuration, it will support up to eight disk drives mirrored. The adapter also supports hot spares in RAID 5 and RAID 0+1 mode. The Advanced SerialRAID Plus Adapter supports connectivity to external disk enclosures and internal RS/6000 SSA configurations. Optional SSA Fiber-Optic Extender is also supported (refer to IBM 7133 sales literature for additional information).

Any supported RS/6000 system can be set up to boot from an Advanced SerialRAID Plus Adapter (#6230), provided a non-RAID SSA disk is included as part of the configuration. Other disks associated with the adapter can be RAID but at least one disk must be a non-RAID SSA disk. The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit. If your system is running with AIX 4.3.3 or later software, native boot capability is supported. For factory system orders with AIX preload requested, an internal SCSI disk drive will be preloaded as the native boot disk even if internal SSA disk drive(s) are present. If your system is running with AIX 4.2.1 or AIX 4.3.2 software, the below procedure applies in order to boot using the Advanced SerialRAID Plus Adapter: 

   The non-RAID SSA disk can be located under the covers of a processor unit or in an external SSA storage unit.
   A supported AIX version of software (with proper updates) must be loaded to the non-RAID SSA disk using AIX's Network Install Manager (NIM) before booting from the non-RAID disk.
   The system with a non-RAID SSA disk must have a network connection with another RS/6000 system performing the NIM Master function to perform the install. On RS/6000 SP systems, a similar network install is performed from a control workstation.
   Once AIX with updates is installed on the non-RAID SSA disk and the system is configured for booting, booting will take place from the boot disk without any support from the control processor or NIM Master and the system does not have to be connected to the network at boot time.

A 3-Way Copy Function is available. This 3-Way Copy Function allows a user to create a third copy to an existing RAID-1 or RAID 0+1 array while mirrored operation continues 3-Way Copy allows the user, at any time after the copy process has completed, to split the third copy off from the original RAID-1 or RAID 0+1 array to form an independent RAID copy. This third copy or "snapshot" copy could be typically used to perform a backup or to test some new application. The 3-Way Copy Function is available only via a code download and can only be gained by going to the SSA web support pages defined below.

When performing SSA device or subsystem planning, installation, upgrades, or preventive maintenance, refer to the following Web support pages. They provide access to the latest SSA publications and support code for the system, SSA adapters, and SSA subsystems. These sites should also be considered during system hardware and/or operating system upgrades if SSA devices are included in the system. 

   http://www.storage.ibm.com/hardsoft/products/ssa/

The above link contains links to SSA publications and other SSA Web sites, including the one below. 

   http://www.storage.ibm.com/hardsoft/products/ssa/rs6k /index.html

The above link contains lists of the latest SSA support code and provides code download capability for the RS/6000 and AIX environments.

Limitation: Internal ports on the adapter are not supported. See machine/model specific information to determine if internal SSA disk drives and associated hardware/cables are supported. 

   Attributes provided: Attachment of SSA devices
   Attributes required: One PCI bus slot
   For 7043-150: (#6230)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.2.1, or AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

Note: AIX 4.2.1 and 4.3.2 require updates to operate properly. An update CD-ROM (9903 or later) containing these updates can be obtained by calling 1-800-879-2 755 in USA and ordering Feature code 0837 for AIX 4.2.1 or Feature code 0838 for AIX 4.3.2. Maximum of 5 adapters per primary I/O drawer and 7 adapters per secondary I/O drawer. Refer to machine limitations for interaction with other adapters. (#6231) 128 MByte DRAM Option Card

(No Longer Available as of June 24, 2005)

The 128 MByte DRAM Option Card (#6231) is a field only optional feature to the Advanced SerialRAID Adapter (#6225) or a factory or field option for the Advanced SerialRAID Plus Adapter (#6230). This option is recommended for dual initiator fail-over Fast Write Cache (FWC) configurations. The option increases the existing DRAM on the adapter to 128 MBytes. In this type of dual initiator FWC configuation, the existing DRAM does not have enough capacity to completely contain a copy of each adapter's 32 MByte FWC and also provide additional working space. The 128 MByte DRAM Option Card provides this additional space needed to contain a full copy of each adapters 32 MByte FWC content and allows for full 32 MByte fail-over protection. If the 128 MByte DRAM Option Card (#6231) is not used with dual-initiator FWC configurations, the effective FWC capacity is reduced to 16 MBytes per adapter.

If this feature is ordered as a field upgrade to an existing SerialRAID adapter (#6225 or 6230), a CD-ROM with appropriate software and publications are also provided. 

   Attributes provided: 128 MByte DRAM memory
   Attributes required: Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230). A 32 MByte Fast-Write Cache Option Card (#6235) is also recommended.
   For 7043-150: (#6231)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.2.1, or AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6235) 32 MByte Fast-Write Cache Option Card

(No Longer Available as of June 24, 2005)

The 32 MByte Fast-Write Cache Option Card (#6235) is a 32 MByte fast- write optional feature that plugs into the IBM RS/6000 Advanced SerialRAID Adapter (#6225) or the Advanced SerialRAID Adapter Plus (#6230). It utilizes non-volatile RAM. During the unlikely event of an Advanced SerialRAID Adapter failure, a replacement Advanced SerialRAID Adapter can be installed and the fast-write cache can be removed from the failing adapter and installed in the new adapter helping to ensure data integrity. The 32 MByte Fast-Write Cache Option Card can provide a significant improvement of data throughput and response time during certain sequence write operations compared to SSA RAID adapters without the fast-write cache. The response time and data transfer improvement using the optional card will vary depending upon the data block sizes, the percentage of sequential writes, machine type/model, and application parameters. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Adapter (# 6225) will operate in either non-RAID or RAID 5 mode, in single-initiator configurations. The 32 MByte Fast-Write Cache Option Card plugged into the Advanced SerialRAID Plus Adapter (# 6230) will operate in non-RAID, RAID 5, or RAID 0+1 mode, in single- initiator or dual initiator configurations. 

   Attributes provided: None
   Attributes required: One Advanced SerialRAID Adapter (#6225) or Advanced SerialRAID Plus Adapter (#6230).
   For 7043-150: (#6235)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: AIX 4.2.1 or 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6308) Personal Microphone

(No Longer Available as of March 19, 1999)

The IBM Personal Microphone is a lightweight microphone and headset which conveniently mounts over and behind the user's ear. The microphone element is attached to the earpiece with a thin tubular boom. The IBM personal Microphone allows adjustments to be made to position the microphone and headset for either the left or right ear.

The IBM Personal Microphone is a perfect addition to the microphone supplied with you system unit. It will allow each user to have their own microphone.

The microphone is suitable for a wide range of applications but is especially suited for speech recognition applications including dictation and navigation in an office environment. The microphone allows consistent performance by providing for an optimum distance the voice source and the microphone element and providing concurrent feedback to the user via the personal headset. 

   Attributes provided:
   Attributes required:
   For 7043-150: (#6308)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6310) IBM ARTIC960RxD Quad Digital Trunk PCI Adapter

(No Longer Available as of June 25, 2004)

Provides voice processing for up to four T1 or E1 digital trunks, providing connectivity for 96 (T1) or 120 (E1) voice channels in a single PCI slot. The voice processing function is provided by Voice Response for AIX LPP. Several network attachment cables are available in support of this adapter and the correct cable should be selected for either T1 or E1networks. (Select from cable features: 2709 (T1,RJ-45), 2710 (E1, RJ-45), 2871/2872 (T1, 100 ohm), 2873/2874 (E1, 120 ohm).

Note: When more than one IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered, the Artic960RxD Quad DTA, H.100, 4-drop Cable (#2877) is required.

Note: When a Digital Trunk Quad PCI adapter (#6309) is already present and an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered, an IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are required.

Note: When an IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) is ordered and an IBM ARTIC960RxD DSP Resource PCI Adapter (#2949) is already present, the IBM ARTIC960RxD Quad DTA, SC Bus, 5-drop Cable (#2878) and the IBM ARTIC960RxD Quad DTA, Four-H.100 to SC Bus Converter Cable (#2879) are required.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: 

   http://www.ibm.com/servers/aix/os/adapters/51.html 

   Attributes provided: Connection of 1 to 4 T1/E1 Trunks
   Attributes required: Available PCI slot, appropriate cables and WebSphere Voice Response for AIX LPP application software.
   For 7043-150: (#6310)
       Minimum required: 0
       Maximum allowed: 3 (Initial order maximum: 3)
       OS level required: AIX Versions 4.2.1, 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#6311) IBM ARTIC960RxF Digital Trunk Resource PCI Adapter for RS/6000

(No Longer Available as of June 28, 2002)

The IBM ARTIC960RxF Digital Trunk Resource PCI Adapter for RS/6000 is a single slot, long, 32-bit PCI adapter. This adapter is designed to be used in conjunction with the IBM ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) and provides additional DSP resources so that voice recognition channels can be supported. These two adapters are designed to be used with the IBM Voice Response for AIX Version 2.2. application but the user may program them to be used for his unique application.

Voice Response for AIX Version 2.2 is an interactive voice response system (IVR) for the AIX operation system with selected IBM RS/6000 systems. Callers can access a wide range of enterprise applications and data using the telephone key pad in response to scripted prompts from the Voice Response IVR. It also provides the base for voice recognition systems enabling a caller to interact using voice instead of buttons on the telephone key pad.

Note: This adapter may have AIX 5.1 support limitations. Go to the following URL to view the latest AIX 5.1 support limitation statements: 

   http://www.ibm.com/servers/aix/os/adapters/51.html 

   Attributes provided: A single, long PCI card.
   Attributes required: A concurrent order or pre-existing ARTIC960RxD Quad Digital Trunk PCI Adapter (#6310) and either an H-100 Bus 4-position Cable (#2877) if total of FC (#6310) and FC (#6311) is less than or equal to 4 or H-100 Bus 8-position Cable (#4353) if total of FC (#6310) and FC (#6311) is more than 4. Two or more adjacent 32-bit or 64-bit PCI bus slots.
   For 7043-150: (#6311)
       Minimum required: 0
       Maximum allowed: _2__ (Initial order maximum: _2_)
       OS level required: AIX Version 4.2.1, 4.3.2, or later
       Initial Order/MES/Both/Supported: Both

(#6509) Media Bay Disk Drive Mounting Kit

(No Longer Available as of June 25, 2004)

This feature provides the hardware for mounting any valid internal half high disk in an available media bay. 

   Attributes provided: Mounting of a valid disk drive in a media bay
   Attributes required: 1 media drive bay
   For 7043-150: (#6509)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6600) Quiet Touch Keyboard, US English, #103P

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6600)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6601) Quiet Touch Keyboard, French, #189

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6601)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6602) Quiet Touch Keyboard, Italian, #142

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6602)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6603) Quiet Touch Keyboard, German/Austrian, #129

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6603)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6604) Quiet Touch Keyboard, UK English, #166

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6604)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6605) Quiet Touch Keyboard, Spanish, #172

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6605)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6606) Quiet Touch Keyboard, Japanese, #194

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6606)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6607) Quiet Touch Keyboard, Brazilian Portuguese, #275

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6607)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6608) Quiet Touch Keyboard, Canadian French, #058

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6608)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6609) Quiet Touch Keyboard, Belgian/French, #120

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6609)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6610) Quiet Touch Keyboard, Belgian/UK-Flemish, #120

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6610)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6611) Quiet Touch Keyboard, Swedish/Finnish, #153

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6611)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6612) Quiet Touch Keyboard, Danish, #159

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6612)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6613) Quiet Touch Keyboard, Bulgarian, #442

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6613)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6614) Quiet Touch Keyboard, Swiss, French/German, #150f/g

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6614)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6616) Quiet Touch Keyboard, Norwegian, #155

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6616)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6617) Quiet Touch Keyboard, Dutch, #143

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6617)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6618) Quiet Touch Keyboard, Portuguese, #163

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6618)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6619) Quiet Touch Keyboard, Greek, #319

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6619)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6620) Quiet Touch Keyboard, Hebrew, #212

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6620)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6621) Quiet Touch Keyboard, Hungarian, #208

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6621)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6622) Quiet Touch Keyboard, Icelandic, #197

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6622)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6623) Quiet Touch Keyboard, Polish, #214

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6623)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6624) Quiet Touch Keyboard, Romanian, #446

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6624)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6625) Quiet Touch Keyboard, Slovakian, #245

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6625)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6626) Quiet Touch Keyboard, Czech, #243

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6626)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6627) Quiet Touch Keyboard, Turkish, #179

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6627)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6628) Quiet Touch Keyboard, Turkish, #440

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6628)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6629) Quiet Touch Keyboard, LA Spanish, #171

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6629)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6630) Quiet Touch Keyboard, Arabic, #238

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6630)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6632) Quiet Touch Keyboard, Serbian-Cyrillic, #118

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6632)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6633) Quiet Touch Keyboard, Korean, #413

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6633)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6634) Quiet Touch Keyboard, Chinese/US, #467

(No Longer Available as of April 26, 2002) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6634)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6635) Quiet Touch Keyboard, French Canadian, #445

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6635)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6636) Quiet Touch Keyboard, Thailand, #191

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6636)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6638) Quiet Touch Keyboard, Russian, #443

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6638)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6639) Quiet Touch Keyboard, Croatian, #105

(No Longer Available as of March 19, 1999) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6639)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#6640) Quiet Touch Keyboard, US English ISO9995, #103P(EMEA)

(For IBM, No Longer Available as of March 26, 2004) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, pearl white color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#6640)
       Minimum required: 0
       Maximum allowed: _1__ (Initial order maximum: _1__)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8131) 128-Port Asynchronous Controller Cable, 4.5 Meter

(No Longer Available as of June 23, 2006)

This cable provides attachment between the 128-port Asynchronous Controller and the first RAN in a daisy chain, or attachment between RANs in the daisy chain. 

   Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
   Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
   For 7043-150: (#8131)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8132) 128-Port Asynchronous Controller Cable, 23cm (9-Inch)

(No Longer Available as of June 23, 2006)

This cable may be substituted for the 4.5 meter (15 foot) async controller cable whenever a customer configuration requires stacked Remote Async Nodes. 

   Attributes provided: Links 128-port Async Controller to RAN or RAN-to-RAN
   Attributes required: (1) 128-port Async Controller or RAN-to-RAN connection in a daisy chain.
   For 7043-150: (#8132)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8133) RJ-45 to DB-25 Converter Cable

(No Longer Available as of November 26, 2010)

This cable can be used to attach EIA-232 devices to the 16 port EIA 232 Remote Async Node (FC 8130 or FC 8134) for the 128-Port Async subsystem. This cable provides a 25-pin D shell connector for device attachment. Four cables are provided per each order. 

   Attributes provided: 4 DB-25 EIA-232 ports
   Attributes required: 4 RJ-45 ports from a RAN (8130, 8134, 8136)
   For 7043-150: (#8133)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8135) 64-Port to 128-Port Pin-Out Converter

(No Longer Available as of July 31, 2001)

The 64-Port to 128-Port Pin-out Converter allows devices currently using 16-Port Concentrators (FC 6401 - from 64-port Async Subsystem) to attach to 16-Port RANs (FC 8130/8134/8136). Quantity (4) per order. 

   Attributes provided: 4 RJ-45 EIA-232 ports
   Attributes required: 4 device cables using 64-port RJ45 wiring.
   For 7043-150: (#8135)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8137) Enhanced Remote Asynchronous Node 16-Port EIA-232

(No Longer Available as of March 31, 2006)

Provides remote connection of up to 16 EIA-232 devices to a 128-Port Asynchronous Controller.

Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate. 

   Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter.
   Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
   Built-in diagnostics can test ports independent of RS/6000 host.
   Full modem control supports the following interface signals: TxD, RxD, RTS, CTS, DSR, DCD, DTR, RI.
   The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
   Individual ports support a maximum EIA-232 distance of up to 31 meters (100 feet), depending on the baud rate.
   Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
   Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling.
   Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. 

   Attributes provided: 16 EIA-232 Async ports
   Attributes required: One (#2944) per eight (#8137)s
   For 7043-150: (#8137)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8138) Enhanced Remote Asynchronous Node 16-Port RS-422

(No Longer Available as of July 31, 2001)

Provides remote connection of up to 16 RS-422 devices to a 128-Port Asynchronous Controller.

Each port can be individually programmed to provide a asynchronous connection of 230 Kbaud, but a limited number of ports in a maximum configuration (128 ports) can be supported at this baud rate. 

   Operation of 16 to 128 ports by supporting up to 8 RANs (4 per synchronous line) with either a Micro Channel, ISA or PCI host adapter.
   Ability to monitor individual port operation, synchronous line station, and other diagnostics from front panel.
   Built-in diagnostics can test ports independent of RS/6000 host.
   Supports the following interface signals: +TxD, +RxD, -TxD, -RxD.
   The same RJ-45 to DB-25 Converter Cable (feature #8133 -- quantity four per order) currently used on the existing RANs can be used to attach devices having a DB-25 connector to the Remote Async Nodes.
   Individual ports support a maximum RS-422 distance of up to 1200 meters (3930 feet), depending on the baud rate.
   Use of the same cabling from host to RAN and RAN to RAN: feature #8131 (4.5 meter), feature #8132 (23 cm) or customer supplied cables.
   Location of RAN up to 330 meters (sync data rate set at 1.2 Mbps) from host using standard shielded 8-wire twisted pair cabling.
   Remote operation via synchronous modems or CSU/DSU extends the distance and allows location of RANs at geographically distant location from the host. 

   Attributes provided: 16 EIA-232 Async ports
   Attributes required: One (#2944) per eight (#8138)s
   For 7043-150: (#8138)
       Minimum required: 0
       Maximum allowed: No max (Initial order maximum: No max)
       OS level required: none
       Initial Order/MES/Both/Supported: Both

(#8227) Tie-down Strap Security Device

(No Longer Available as of May 28, 2010)

The tie-down strap is used as an aid in securing the system unit by connecting the system until via a cable to a more secure item such as a desk, wall fixture, etc. 

   Attributes provided:
   Attributes required:
   For 7043-150:
       Minimum required: 0
       Maximum allowed: No maximum
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8422) Spaceball 3D Input Device

(No Longer Available as of December 30, 2006)

Spaceball is a 3D input device that allows a customer to view a computer-generated model from many angles. By applying fingertip control to push, pull, and twist the ball, you manipulate the image on the screen. Spaceball facilitates zooming, panning, and rotating. 

   Attributes provided: Spaceball 3D Input Device
   Attributes required: S1 or S2 serial port
   For 7043-150:
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.2.1, 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#8423) Magellan XT 3D Input Device

(No Longer Available as of December 30, 2006)

The Magellan XT 3D Input Device is a high-level 3D input device which provides real-time 3D motion control for increased productivity, better design comprehension, and early detection of design errors. 

   Attributes provided: Magellan XT 3D Input Device
   Attributes required: S1 or S2 serial port
   For 7043-150: (#8423)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.2.1, AIX 4.3.2 or later
       Initial Order/MES/Both/Supported: Both

(#8679) IBM Multimedia Kit for RS/6000

(No Longer Available as of December 31, 1999)

The IBM Multimedia Kit for RS/6000 consists of a video camera, speakers, and connecting cables. 

   Desktop Video Camera
       Reduced Flicker Picture Mode, shutter speed is fixed to avoid noticeable flickering in environments with fluorescent lighting
       Microphone for live audio (connection via a 3.5 mm miniature audio plug)
       Capability to focus manually close to 0 cm
       Back light compensation (improved image with back light situations)
       White-balance fixed mode, for optimal color stability
       An LED that shows the camera is on
       Camera output through an RCA composite video connection connects to the Ultimedia Video Capture Adapter
       NTSC format 
   High-power output speaker system includes two premium Infinity(R) sound quality speakers specially designed to fit and match IBM equipment 

   Attributes provided: Video camera, microphone, and speakers
   Attributes required: Ultimedia Video Capture Adapter
   For 7043-150: (#8679)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: AIX 4.1.5, 4.2.1, 4.3 or later
       Initial Order/MES/Both/Supported: Both

(#8700) Quiet Touch Keyboard, Black, US English, #103P

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8700)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8701) Quiet Touch Keyboard, Black, French, #189

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8701)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8702) Quiet Touch Keyboard, Black, Italian, #142

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8702)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8703) Quiet Touch Keyboard, Black, German/Austrian, #129

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8703)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8704) Quiet Touch Keyboard, Black, UK English, #166

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8704)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8705) Quiet Touch Keyboard, Black, Spanish, #172

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8705)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8706) Quiet Touch Keyboard, Black, Japanese, #194

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8706)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8707) Quiet Touch Keyboard, Black, Brazilian Portuguese, #275

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8707)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8708) Quiet Touch Keyboard, Black, Canadian French, #058

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8708)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8709) Quiet Touch Keyboard - Business Black, Belgian/French, #120

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8709)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8710) Quiet Touch Keyboard - Business Black, Belgian/UK-Flemish, #120

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8710)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8711) Quiet Touch Keyboard, Black, Swedish/Finnish, #153

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8711)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8712) Quiet Touch Keyboard, Black, Danish, #159

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8712)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8713) Quiet Touch Keyboard, Black, Bulgarian, #442

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8713)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8714) Quiet Touch Keyboard, Black, Swiss,French/German, #150f/g

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8714)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8716) Quiet Touch Keyboard, Black, Norwegian, #155

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8716)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8717) Quiet Touch Keyboard, Black, Dutch, #143

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8717)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8718) Quiet Touch Keyboard, Black, Portuguese, #163

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8718)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8719) Quiet Touch Keyboard, Black, Greek, #319

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8719)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8720) Quiet Touch Keyboard, Black, Hebrew, #212

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8720)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8721) Quiet Touch Keyboard, Black, Hungarian, #208

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8721)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8722) Quiet Touch Keyboard, Black, Icelandic, #197

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8722)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8723) Quiet Touch Keyboard, Black, Polish, #214

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8723)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8724) Quiet Touch Keyboard, Black, Romanian, #446

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8724)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8725) Quiet Touch Keyboard, Black, Slovakian, #245

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8725)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8726) Quiet Touch Keyboard, Black, Czech, #243

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8726)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8727) Quiet Touch Keyboard, Black, Turkish, #179

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8727)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8728) Quiet Touch Keyboard, Black, Turkish, #440

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8728)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8729) Quiet Touch Keyboard, Black, LA Spanish, #171

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8729)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8730) Quiet Touch Keyboard, Black, Arabic, #238

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8730)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8732) Quiet Touch Keyboard, Black, Serbian-Cyrillic, #118

(No Longer Available as of April 26, 2002)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8732)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8733) Quiet Touch Keyboard, Black, Korean, #413

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8733)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8734) Quiet Touch Keyboard, Black, Chinese/US, #467

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8734)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8735) Quiet Touch Keyboard, Black, French Canadian, #445

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8735)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8736) Quiet Touch Keyboard, Black, Thailand, #191

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8736)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8738) Quiet Touch Keyboard, Black, Russian, #443

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8738)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8739) Quiet Touch Keyboard, Black, Croatian, #105

(No Longer Available as of May 31, 2006)

Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection. 

   Attributes provided: keyboard
   Attributes required: keyboard port
   For 7043-150: (#8739)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both
       CSU: No
       Return parts MES: No

(#8740) Quiet Touch Keyboard, Black, US English ISO9995, #103P(EMEA)

(No Longer Available as of May 31, 2006) 

   Attributes provided: Quiet and soft-touch key depression, 3-meter keyboard cable, removable wrist rest, Business Black color, standard 6-pin mini-DIN connection.
   Attributes required: Supported RS/6000 system with proper AIX operating system installed.
   For 7043-150: (#8740)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#8741) 3-Button Mouse, Black

(No Longer Available as of May 31, 2006) 

   Attributes provided:
   Attributes required:
   For 7043-150: (#8741)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#9004) Southern Hemisphere Designator for Monitors

Specifies that southern hemisphere models are required for all monitors on the initial plant order or on MES orders. 

   Attributes provided: None
   Attributes required: Monitor
   For 7043-150: (#9004)
       Minimum required: 0
       Maximum allowed: _1_ (Initial order maximum: _1_)
       OS level required: None
       Initial Order/MES/Both/Supported: Both

(#9300) Language Group Specify - US English

English language group for nomenclature and standard publications. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#9300)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9705) Language Group Specify - Polish

Polish language group for Nomenclature and Standard Publications. 

   Attributes provided: none
   Attributes required: none
   For 7043-150: (#9705)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9712) Language Group Specify - Canadian French

Canadian French language group for Nomenclature and Standard Publications. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#9712)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9719) Language Group Specify - Hungarian

Hungarian language group for Nomenclature and Standard Publications. 

   Attributes provided: none
   Attributes required: none
   For 7043-150: (#9719)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9720) Language Group Specify - Slovakian

Slovakian language group for Nomenclature and Standard Publications. 

   Attributes provided: none
   Attributes required: none
   For 7043-150: (#9720)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9721) Language Group Specify - Russian

Russian language group for Nomenclature and Standard Publications. 

   Attributes provided: None
   Attributes required: None
   For 7043-150: (#9721)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial

(#9800) Power Cord Specify - United States/Canada

The following countries use the #9800 power cord to power the system unit and/or peripheral features requiring a power cord. 

   DOM U.S.
   649 CANADA
   832 SAUDI ARABIA
   619 BAHAMAS
   621 BARBADOS
   627 BERMUDA
   629 BOLIVIA
   631 BRAZIL
   661 COLOMBIA
   663 COSTA RICA
   681 DOMINICAN REPUBLIC
   683 ECUADOR
   829 EL SALVADOR
   731 GUATEMALA
   640 GUYANA
   735 HONDURAS
   759 JAMAICA
   781 MEXICO
   791 NETHERLANDS ANTILLES
   811 PANAMA
   843 SURINAM
   859 TRINIDAD
   871 VENEZUELA
   760 JAPAN
   761 JAPAN (PDS)
   766 KOREA
   818 PHILIPPINES
   858 TAIWAN 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9800)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9802) Power Cord Specify - Brazil (125V, 15A) 

   Attributes provided: power cord
   Attributes required: None
   For 7043-150: (#9802)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported: Initial
       CSU: Does not apply
       Return parts MES: Does not apply

(#9820) Power Cord Specify - Belgium, Finland, France (250V, 16A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9820)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9821) Power Cord Specify - Denmark (250V, 10A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9821)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9825) Power Cord Specify - United Kingdom (250V, 13A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9825)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9827) Power Cord Specify - Israel (250V, 6-16A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9827)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9828) Power Cord Specify - Switzerland (250V, 10A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9828)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9829) Power Cord Specify - South Africa/Pakistan (250V, 16A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9829)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9830) Power Cord Specify - Italy (250V, 10A and 16A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9830)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9831) Power Cord Specify - Argentina (250V, 10A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9831)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9833) Power Cord Specify - Thailand (250V, 15A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9833)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:

(#9834) Power Cord Specify - Uruguay (250V, 10A) 

   Attributes provided: 6 ft. power cord
   Attributes required: None
   For 7043-150: (#9834)
       Minimum required: 0
       Maximum allowed: 1 (Initial order maximum: 1)
       OS level required: None
       Initial Order/MES/Both/Supported:
Retrieved from "https://aixmuseum.mooo.com/wiki/index.php?title=Feature_Descriptions_for_7043-150_IBM_RS/6000_Model_150&oldid=16"